HANDLE SCREW FOR WOOD WINDOW WINDER
G285

($0.50) £0.50 exc vat

($0.60) £0.60 inc vat

In stockIn stock

($0.50) £0.50 exc vat

($0.60) £0.60 inc vat

In stockIn stock

Recommended usage 2 x G285 to fit one mini.

People also bought products
DOOR CARDS PAIR 1976-1980 BLACK
DP3048A

Door cards, pair 1976-1980 black.

($84.54) £84.54 exc vat

($101.45) £101.45 inc vat
POLISHED ALLOY DOOR PULL HANDLES - PAIR
MSA1132

High quality, polished alloy door pull handles.

These aluminum handles will wind up window cars and they won't snap off like the original plastic ones

For matching window winders see MSA1130.

See MSA1129 for...

($13.02) £13.02 exc vat

($15.62) £15.62 inc vat
DOOR CHECK STRAP CUMULUS GREY(LIGHT GREY)
14E8403

Cumulus Grey check strap-Dove grey similar but lighter shade

Check straps matched seat colours or outer main seat colour on two tone types

ALE1221 Black

14E8403 Cumulus grey-light grey-darker than ...

($13.08) £13.08 exc vat

($15.70) £15.70 inc vat
INTERIOR DOOR HANDLE MK1/2
GLZ119A

MK1/2 interior door handle with screw and washer.

This solid "spoon" handle is brittle and easily broken.

These are the original shape as sold under the Unipart label, not the later Rover bagged item which was a reproduction with d...

($19.64) £19.64 exc vat

($23.57) £23.57 inc vat
DOOR HANDLE.FLANGED SCREW FOR WINDER HANDLE CZA710...
ZKC3317

special screw for CZA7109 handle only

($1.10) £1.10 exc vat

($1.32) £1.32 inc vat
DOOR HANDLE MONTE CAR CHROME OPENING HANDLE
G283

Metal chromed old type classic handle revived for use on MG variants and then a fashion item on minis. On later cars CMZ312 screw might be required which has a smaller diameter head and longer thread. Length 90mm.

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
POLISHED ALLOY WINDOW WINDER HANDLES - PAIR
MSA1130

High quality, these handles fit all models with windup windows.



For matching door opening handles and bezel, see MSA1131/MSA1135.

See MSA1129 kit for car set of plain alloy polished handles.

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
WINDOW WINDER HANDLE
CZA7109

Fitted on cars up to about 1982 approximately before spring type knob on handle was introduced for safety homologation YXX3199PA.

The screw this CZA7109 handle is ZKC3317.

($5.16) £5.16 exc vat

($6.19) £6.19 inc vat
10 PIECE ALLOY INTERIOR DOOR HANDLE SET
MSA507

This 10 piece handle set is exactly the same kit as sold by every other mini specialist is in bright alloy (not polished alloy as per our other superior kit MSA1129) and consists of two of each of the following, door openers, window winders and their...

($33.75) £33.75 exc vat

($40.50) £40.50 inc vat
DOOR POCKET MOULDING
24A1169

The chrome moulding to fit the door bin on all sliding type window doors, MK1/2 and all vans/pickups. See 14A6879 for early cars with lug ends held on by screws

Use the correct single sided prong clips only ADH3809 ...

($12.50) £12.50 exc vat

($15.00) £15.00 inc vat
DOOR OPENING HANDLE BLACK PLASTIC
JPC8387PA

This plastic handle fitted any wind up window cars up to the introduction of the twin points, which then changed and the handle fitted from 1996 on is now obsolete.

($4.35) £4.35 exc vat

($5.22) £5.22 inc vat
DOOR HANDLE CHROME WINDOW WINDER HANDLE SINGLE
G282

If you drive your MINI/MGB often then you know that the standard plastic window winder handles are prone to breaking. These chrome metal handles are somewhat stronger and look great alongside the other chrome trim in the car's interior. Next time ...

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
DOOR WINDOW WINDER HANDLES PAIR IN BURR WOOD FINIS...
MSA0194

door window winder handle pair in Burr walnut finish to compliment the wooden dashes.

If your old screws do not fit see G285

See also MSA0193 door opening handles, MSA0191 door cappings and MSA0192...

($62.49) £62.49 exc vat

($74.99) £74.99 inc vat
DOOR OPEN HANDLES IN BURR WALNUT FINISH
MSA0193

door opening pair of handles in Burr walnut to compliment the wooden dashes

See also MSA0192 door pull handles, MSA0191 door cappings and MSA0194 window winder handles. Use SE910161 screw.

($62.49) £62.49 exc vat

($74.99) £74.99 inc vat
WINDOW WINDER HANDLE BEZEL BLACK SINGLE
CZH701PA

plastic bezel that sits behind window winder handle.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
DOOR CAPPINGS IN BURR WALNUT SET OF 4
MSA0191

door cappings in Burr walnut to compliment the wooden dashes

See also MSA0193 door opening handles, MSA0192 door opening handles and MSA0194 window winder handles

($136.46) £136.46 exc vat

($163.75) £163.75 inc vat
SUNVISOR & MIRROR WHITE WITH WHITE BACKING 1970 ON
SV2017WW

White with mirror aftermarket sun visor for Mk3 models from 1977 -92 which were thinner than pre December 1965 for safety crash requirements. Check out the special clips to hold these visors as they are sold seperately in car sets only as [link]SV202...

($43.79) £43.79 exc vat

($52.55) £52.55 inc vat
SUNVISOR WHITE WITH WHITE BACKING
SV2016WW

Plain white with white backing aftermarket sun visor as fitted to Mk3 models 1977-92 which were thinner than Mk1 for safety crushing requirements. Although not standard for earlier models will fit cars from December 1965. Check out the special clips ...

($40.44) £40.44 exc vat

($48.53) £48.53 inc vat
SUNVISOR ALL 1965 ON IN CREAM CRACKLE WITH MIRROR
SV2017C

Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021

Mk1/2 1965 on cream crackle SV2017C

Mk3 196...

($43.79) £43.79 exc vat

($52.55) £52.55 inc vat
SUNVISOR 1970 ON WITH MIRROR IN BLACK
SV2017A

Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...

($45.29) £45.29 exc vat

($54.35) £54.35 inc vat