SUSPENSION KIT OF AGX DAMPERS PLUS C-STR644
MSSK3011A

($317.65) £317.65 exc vat

($381.18) £381.18 inc vat

In stockIn stock
Set of latest AGX on car adjustable dampers plus C-STR644

($317.65) £317.65 exc vat

($381.18) £381.18 inc vat

In stockIn stock

Recommended usage 1 x MSSK3011A to fit one mini.

Recommended products

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

Any time you do major suspension work on a Mini where it is necessary to compress the front spring (rubber cone) it will be necessary to have this tool. It comes with 2 center pins to work with early AF thread 1/2" fine thread) and late (metric) cone...

This new type suspension cone tool for removing or refitting the rubber suspension cone is METRIC thread only and improved by using a hex(allen)key to screw in and hold the centre spindle. There cannot be many cars left out there with the AF type th...

Alternative products

Ultimate road damper and geometry kit which includes following parts. A set of AGX Evolution dampers with hilos plus adjustable tie rods and lower arms with the correct bush kits. For the rear a set of camber and tracking brackets. when fitted the su...

Kit contained products

Mini Spares suspension kit includes all four adjustable machined alloy trumpets in 6082 T6 hardened alloy plus the two extended rod struts required for the rear. Many people will tell you why you should consider upgrading and using the original class...

The New Front Evolution AGX shock absorber is twin tube type and gas filled. On car 8 point easy adjustable specific settings. This is currently one of the shortest fitted length dampers we stock. Closed length 210mm from pin centres. Open length is ...

R/H Rear Evolution AGX damper is a twin tube gas filled adjustable type. On car 8 point easy adjustable specific settings.The fitted length is 235mm from pin centres closed. Open length is 362mm.

See Dodds diary on Dampers for more informati...

L/H Rear Evolution AGX damper is a twin tube gas filled adjustable type. On car 8 point easy adjustable specific settings.The fitted length is 235mm from pin centres closed. Open length is 362mm.

See Dodds diary on Dampers for more informati...

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

When keith Dodd bought his twin point mini he took off the original dampers

and replaced them with 552018 & 552019 dampers. Although original Hilos were fitted this kit, the budget adjustable suspension will improve...

Kayaba gas upgrade standard road height dampers (342001/2 and budget height adjusters).

The New Front Evolution AGX shock absorber is twin tube type and gas filled. On car 8 point easy adjustable specific settings. This is currently one of the shortest fitted length dampers we stock. Closed length 210mm from pin centres. Open length is ...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.

It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.

HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.

Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 used the same bush 2A5818(C-STR638) at the front and rear of the subframe, ...

Mini Spares product UK made especially for use when geometry has been changed, such as fitting adjustable tie rods or lower arms, or on any cars with corrected castor angles.

Set of 4 bushes.

These metal sleeved bushes are specially...

Pair of adjustable tie rods. See 21A1092 tie bar kit.

When you change the length of the lower control arm to attain the desired degree of camber, the caster also changes. To reset it you must be able to change the length of the ...

KYB front dampers, 9 years ago after initial testing Minispares

introduced the Kyaba (KYB)'s gas charged "Gas-a-just" dampers to the mini market providing an excellent upgrade for those running standard shocks on a road car even with 13" whe...

Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis up to 1976 on but the later kit MS41 will fit early...

Mini Spares product,metal trunnion to hold the 2-2A5818MS bushes on the rear subframe.

Originally there were 4 of these trunnions on the subframe but in 1976 (MK4)the front 2 brackets were strenghened and enlarged to [link]21A2...