(121,80 €) £121.80 exc vat
(146,16 €) £146.16 inc vat
In stock
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mouldings DDJ10002 between the front and rear arch on each side.
It also does not include the metric nuts for fitting which are avaiable as FN105047 for the originals or GFK3295 as a replacement. The fixing template sheets can be downloaded FREE from our Website under tech tips (technical download) part numbers VUR100180 to VUR100230. The stiffeners for the wings when you cut them are ALR360380. All arches are available as separate replacements.
The original stud fitted by the factory assembly line was KLMP4402
(121,80 €) £121.80 exc vat
(146,16 €) £146.16 inc vat
In stockRecommended usage 1 x DFK100460LML to fit one mini.
Original metric fixing nut for genuine Rover sportspack arches.
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
Set of four very good copies of the original rubber wheel arches as fitted to
the sports pack models from 1997 on. Not quite as good as genuine in finish perfection,BUT THE DOWN SIDE is the coating needs proper etch primer for applying paint...
Original genuine rubber wheel arch to body seal with self adhesive backing. Factory fitted to all late Minis with either Sportspack arches or colour coded plastic arches.
Length 107cm. Sold individually.
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
Original metric fixing nut for genuine Rover sportspack arches.
A full set of four arches and two side trims as fitted to all factory cars from 1984 on as standard fitment. Kit includes set of black screws although some were originally held on by pop rivets ADU8629
Black Plastic Fluted Strip, runs between the 2 plastic Mini Special Arches. Fitted as standard from 1984 to 1992. Approximately 1270mm long.
Right hand front
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mould...
Left hand rear
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mouldin...
left hand front
Genuine moulded wheel arch as fitted to the sports pack mini with 13" wheels has now been upgraded with a brass insert to take a stud ZUA000250. This item does not include the stud or the black rubber seam mouldi...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Original fitment L/H mirror with old english white backing and is the only painted mirror currently in production.See GS25320 for matching pair
Original fitment R/H mirror with old english white backing and is the only painted mirror currently in production.See GS25320 for matching pair
The Mini's roof begs to have a British flag on it! This kit is made of pre-cut vinyl and can be applied by anyone! This is a genuine Rover accessory. The colours blue and red are called pop art design because Rover were not allowed by law to use th...
Body Seam Covers. The seams of the Mini are designed to be covered. Both original and aftermarket strips are available. An aftermarket stainless steel version is also in stock for the very special Mini, see 8B12401
Sportspack type decal kit.
This kit includes 2 mini cooper laurels and pin stripes to cover bodyside, door and front wing as a car set with the bonnet stripes in white.
This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.