(159,48 €) £159.48 exc vat
(191,38 €) £191.38 inc vat
In stock
These are the 4 major parts that can give your car a fresh look- only fits wind up window type doors as fitted to MK3 range mid 1973 on , without ash tray facility in rear glove box.
Cooper S and Mini 1970-73 had a different grain pattern and is only available in BlackMSSK1015 or Navy,but after 1973 many trim changes took place and this MK1 grain style has been designed to replace any wind up window saloon at a budget price pre 1996.
From 1996 the rear parcel shelf was modified for the rear seatbelts on the "C" post. MkIV Heritage bodyshells have these C posts also.
(159,48 €) £159.48 exc vat
(191,38 €) £191.38 inc vat
In stockRecommended usage 1 x MSSK1011 to fit one mini.
Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...
Vinyl covered 9 piece black interior trim kit
This kit is for wind up window type doors,for MK3 saloons 1973 onwards (except Cooper S) and contains 2 door trims,2 rear quarter trims,rear parcel shelf,2 rear glove box trims and 2 rear wheel a...
Mini and Cooper S MK3 correct Mini door and rear quarter trim(4 piece kit in vinyl as per original pattern 1970 to mid 1973. 1973 is when the rear quarter panel trim shape has a cut out where the ash tray mount fitted and if you look and click on dia...
Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...
This is a 2 piece headlining for mini travellers, for the later Clubman 2 piece headlining see part number HL3022
One pair (saloon car set) of rear quarter door cards in black , 1976 - 1980
Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...
Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow
number 1 with red ends is EEB100060
number 2 and 3 is white ends are both EEB100070
number 4 with black ends is EEB100080
...
door cappings in carbon fibre to compliment carbon fibre finished dash
Similar to those fitted as standard on the late Coopers this piece of trimming is purely cosmetic although it may help to eradicate some road noise that might get past the standard rubber gaiter--This is black with red stitching.
Black sun visor less mirror that requires clips both ends but never a standard fitment colour fits cars from Dec 1965. Available as a sought after alternative to the cream colour. The brackets are available as a car set only(4 clips) as SV20...
These headlinings are held in by different shape/length rods which are NOT included but we do include the rear corner side sections between the rear side window and backlight which many poor copies do not
the rods are
red end x1...
This chromed bracket is to secure the early Mini sunvisor with the central location.
1959-64 visors had one central hinge and in October 1964-65 they fitted a sunvisor with a hinge one end and clip fixing the other-this is when the first pla...
Ideal for solving the problem of fitting extra speaker's, this speaker board is simple to fit, and well finished.holes are oval shaped 6"x9"
Ideal for solving the problem of fitting extra speaker's, this speaker board is simple to fit, and well finished speaker holes are oval 6"x9"
Full carpet boot liner kit, completely lines the inside of the boot area.
Not suitable for MPI minis.
Full carpet boot liner kit, completely lines the inside of the boot area.
Not suitable for MPI minis.
The rubber type grip fitted on handbrakes-
will fit any single cable hand brake from 1976 on
Mk1/2 used 13H5541 thinner plastic type--to fit this to pre 1976 early cars you will need to put lots of sticky tape on the h...
High quality, polished alloy door pull handles.
These aluminum handles will wind up window cars and they won't snap off like the original plastic ones
For matching window winders see MSA1130.
See MSA1129 for...
Bracket, mk2 switch panel, LH. Locates swith panel to lower dash rail when ALA6621 is fitted. 1967-1987.
Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.
Also suitable for Twin Point indicator fixings.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.