Standard size crankshaft washers as a set of four, fits 998 and 1100cc.

£10.70 exc vat

£12.84 inc vat

MAINS 998/1100+10 PRE A PLUS - MAHLE WAS VANDERVEL

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 10 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide.

£30.00 exc vat

£36.00 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

CRANK THRUST WASHER SET +0.30" 1275

ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE

C-AEB91306-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.69 exc vat

£86.03 inc vat

BIG ENDS +10 998/1098/970/1071/ COOPER "S" ACL RAC...

C-AEB572-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£66.27 exc vat

£79.52 inc vat

BIG ENDS SET 998/1098/970/1071/ COOPER "S" ACL RAC...

C-AEB572-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£66.27 exc vat

£79.52 inc vat

CRANK THRUST WASHER SET STANDARD 1275

ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat

CAM LINER SET 1275

ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all 1275cc blocks plus 970 and 1071 Cooper S. It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed...

£15.75 exc vat

£18.90 inc vat

BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat

BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S

AEB572-40

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£28.02 exc vat

£33.62 inc vat

CRANK THRUST WASHER SET 1275 30 THOU OVERSIZE

VPW41-030

Set of +.030 thrust washers for 1275.Very useful for machining down when fitting non S cranks in 1275cc block

£14.00 exc vat

£16.80 inc vat

CRANK THRUST WASHER SET 1275

VPW41

Set of std VP thrust washers for 1275.

£14.25 exc vat

£17.10 inc vat

BIG END SET STANDARD 998/1100 & COOPER S

VP572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. Vandervell, once the only bearings to use on a competition motor they are now made by Mahle. ACL is now commonly used in race engines.

£36.75 exc vat

£44.10 inc vat

MAINS 998/1100+10 PRE A PLUS - MAHLE WAS VANDERVEL

VP733-10

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 10 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide.

£30.00 exc vat

£36.00 inc vat

998/1100 MAIN SHELLS PRE A PLUS - MAHLE

VP733-00

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at standard size. Early 850 mains were VP592 and 1.185" 30.10mm wide..Quantity required-1 set.

£30.00 exc vat

£36.00 inc vat

MAINS SET 30 OVERSIZE 998/1100 upto 1985 with all ...

AEM3314-30

Main bearings for the crankshaft as preferred by performance engine builders 30 thou oversize pre 1985

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£27.00 exc vat

£32.40 inc vat

BIG END SET 20 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-20

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat

CRANK THRUST WASHER SET 1275 3 THOU OVERSIZE

AEW2136-003

Set of +.003 thrust washers for 1275.

£7.60 exc vat

£9.12 inc vat