LOWER ARMS. ON CAR ADJUSTABLE

Ultimate lower arm for road or race. (pair supplied)

One piece, forged, fully adjustable on the car lower arms (with knuckle for bushes) to allow adjustment for any camber setting required. Sold in pairs only. It is recommended that you fit ...

£54.40 exc vat

£65.28 inc vat

LOWER ARMS ON CAR ADJUSTABLE WITH SPHERICAL JOINTS...

C-AJJ3360A

one piece forged lower rod end arms

unbelievably at this price they are not the welded type as sold by many of our competitors

Same as the C-AJJ3360 lower arm kit, but includes the spherical rod ends,spacers and dustcov...

£97.32 exc vat

£116.78 inc vat

LOWER ARM SPERICAL JOINTS PLUS COVERS AND SPACERS ...

C-AJJ3360B

extra parts required to convert the C-AJJ3360 lower arms to spherical rod end type if the arms were previuosly purchased-These parts are available with the arms as C-AJJ3360A as a money saver

£45.57 exc vat

£54.68 inc vat

SUSPENSION PACK OF GEOMETRY ITEMS WITH SPHERICAL J...

MSSK3013A

Ultimate geometry kit for competition use which includes following parts. Adjustable tie rods with Mini spares tie bar bush kit (not spherical joints) and Spherical jointed lower arms with the dust covers. For the rear a set of camber and tracking br...

£165.24 exc vat

£198.29 inc vat

MINISPARES EVOLUTION RUBBER SUSPENSION CONE

FAM3968EVO

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

£40.88 exc vat

£49.06 inc vat

SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER

GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

£4.88 exc vat

£5.86 inc vat

DAMPER BILSTEIN B4 GAS FRONT

19-221694

Standard gas filled replacement front shock absorber from Bilstein.

Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

£21.00 exc vat

£25.20 inc vat

BALL JOINT EXTRA SHIM KIT (6 SHIMS)

2A4242

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

£2.48 exc vat

£2.98 inc vat

TIE BAR BUSH - HARD RUBBER SINGLE BUSH ONLY

C-STR628

Tie rod extra hard rubber bush, harder than standard.

You dont want these bushes too hard as it can cause the threaded on the end of the tie rod to break under extreme conditions.

In theory the outer ones should be harder for rigidi...

£1.05 exc vat

£1.26 inc vat

SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS 4 GSV...

C-STR644A

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

£69.67 exc vat

£83.60 inc vat

SUBFRAME TOWER IMPROVEMENT KIT FOR FRONT SUBFRAME

C-STR640A

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

£15.81 exc vat

£18.97 inc vat

LOWER ARM SPERICAL JOINTS PLUS COVERS AND SPACERS ...

C-AJJ3360B

extra parts required to convert the C-AJJ3360 lower arms to spherical rod end type if the arms were previuosly purchased-These parts are available with the arms as C-AJJ3360A as a money saver

£45.57 exc vat

£54.68 inc vat

LOWER ARMS ON CAR ADJUSTABLE WITH SPHERICAL JOINTS...

C-AJJ3360A

one piece forged lower rod end arms

unbelievably at this price they are not the welded type as sold by many of our competitors

Same as the C-AJJ3360 lower arm kit, but includes the spherical rod ends,spacers and dustcov...

£97.32 exc vat

£116.78 inc vat

ROAD RALLY RUBBER CONE SPRING - RED SPOT

C-STR687

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

£49.60 exc vat

£59.52 inc vat

2.0° NEGATIVE CAMBER LOWER ARMS

C-AJJ3364A

Lower suspension arms to give 2.0 extra degrees of negative camber. Stamped with 2.0 Sold in pairs only.

General:See also c-AJJ3360 fully adjustable arms

Negative camber lower arms are specifically forged in different degrees to...

£52.00 exc vat

£62.40 inc vat

GREASE NIPPLE TOP ARM (45°)

UHN445

Angled grease nipple for the upper arm on the front suspension of all Minis

importantly lubricates the upper arm spindle which so often gets neglected so check yours out and make sure this nipple is working properly. Also fits rear radius ar...

£0.85 exc vat

£1.02 inc vat

LOWER ARM BUSH UPGRADE BLACK POLY TYPE

21A1882MS

Lower arm top hat bush in poly to fit all lower arms with twin taper as standard from 1965. Mini Spares have upped the game once again with these superbly finished bushes which surpass anything on the market. Fitted with a metal bush insert these are...

£1.50 exc vat

£1.80 inc vat

LOWER ARM BUSH SET RACE GRADE WITH CORRECTED GEOME...

C-STR631

A must-when the castor and camber angles are changed or whenever the geometry of the car is set up you will require these bushes. They are good for cars with up to 3.5 degrees of castor angle.

From November 2003 they have been made from a s...

£11.00 exc vat

£13.20 inc vat

SHOCK ABSORBER TOP FRONT BRACKET R/H

21A471

Genuine Mini Spares part improved from original for the R/H upper mounting point of your damper(shock absorber) and fit 14A6948 captive nut plates for upper bolt fixings . For lowered suspension use C-AJJ3359

£18.38 exc vat

£22.06 inc vat

COMPETITION RUBBER CONE SPRING - YELLOW SPOT

C-STR688

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

£52.00 exc vat

£62.40 inc vat

TIE BAR BUSH KIT FOR ROAD/RALLY RACE (4 BUSHES)

C-STR627

Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.

HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.

Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...

£8.22 exc vat

£9.86 inc vat

SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS

HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

£37.65 exc vat

£45.18 inc vat

UPPER ARM REPAIR KIT

MSK001

Mini Spares own to original drawing specifications with heat treatment correctly applied where appropiate.Lack of proper maintenance (grease) will make the pivot shaft and/or bearings wear that much faster. In severe cases the shaft may rust to the b...

£12.81 exc vat

£15.37 inc vat

FRONT BUMP STOP PRE '76 DRY SUSPENSION

2A4332

Minispares dry suspension type bump stop with 2 threaded retaining bolts which was replaced by a single bolt on MK4 cars from 1976 on. For 1976 on see FAM2764 or FAM2764MS. (nuts not included)

£4.50 exc vat

£5.40 inc vat