SCREW DOOR HINGE / STRIKER PLATE MK3 1969 ON

Countersunk, crosshead screw. 1/4"unf 19mm (3/4") total length.

This screw fits the internal door hinges on wind up window cars and the striker plate on the B post.

£0.32 exc vat

£0.38 inc vat

DOOR HINGE METAL SUPPORT PLATE 2.2mm thick

ALA6381

These shims are what the factory used to fit on the other side of the hinge panel as a stiffener and sometimes even to align the doors themselves, 2.2mm thick.

£2.05 exc vat

£2.46 inc vat

WASHER PLAIN 1/4" x 1/2"

GFK1113

£0.08 exc vat

£0.10 inc vat

NUT PLAIN 1/4" UNF

GFK3211

£0.07 exc vat

£0.08 inc vat

MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL

ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat

DOOR HINGE L/H TOP MK3

CZH203

Also see kits MSSK017 and MSSK017B

Left hand top hinge -wind up window type minis from 1970 on-- note -the studs actualy thread into the genuine hinge and can be replaced with a bolt if damaged or broken

£33.02 exc vat

£39.62 inc vat

DOOR HINGE KIT SALOON MK3 SET NON GENUINE

MSSK017B

4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.

Sold seperately as

top right CZH202MS 1 r...

£54.00 exc vat

£64.80 inc vat

DOOR HINGE KIT SALOON MK3 SET NON GENUINE

MSSK017B

4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.

Sold seperately as

top right CZH202MS 1 r...

£54.00 exc vat

£64.80 inc vat

DOOR CHECK STRAP MK III ONWARDS NON GENUINE

ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

£7.50 exc vat

£9.00 inc vat

SQUARE DOOR STRIKER GASKET

FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

£1.00 exc vat

£1.20 inc vat

DOOR STRIKER PLATES STAINLESS STEEL PAIR

CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

£11.63 exc vat

£13.96 inc vat

DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL

ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat

DOOR HINGE FITTING KIT COMPLETE MK3 ON

MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

£18.09 exc vat

£21.71 inc vat

MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL

ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat

SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD

ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

£0.92 exc vat

£1.10 inc vat

SCREW FOR MK3 DOOR HANDLE

PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

£0.30 exc vat

£0.36 inc vat

WIND DEFLECTORS FOR FRONT DOORS WIND UP WINDOW TYP...

MSA1102

A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.

£53.49 exc vat

£64.19 inc vat

DOOR SEAL UPPER L/H TWIN POINT CARS 1996on

CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

£16.50 exc vat

£19.80 inc vat

DOOR SEAL UPPER R/H TWIN POINT CARS 1996on

CFB101120

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim. fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

£16.50 exc vat

£19.80 inc vat

DOOR SEAL LOWER L/H TWIN POINT CARS 1996on

CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat

DOOR SEAL LOWER R/H TWIN POINT CARS 1996on

CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat

WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

£2.60 exc vat

£3.12 inc vat

DOOR HINGE KIT SALOON MK3 SET NON GENUINE

MSSK017B

4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.

Sold seperately as

top right CZH202MS 1 r...

£54.00 exc vat

£64.80 inc vat

DOOR HINGE LOWER FOR BOTH SIDES MK3 ON

CZH212MS

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

£14.40 exc vat

£17.28 inc vat

DOOR HINGE R/H UPPER MK3

CZH202MS

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

£14.40 exc vat

£17.28 inc vat

DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...

MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

£56.28 exc vat

£67.54 inc vat

PLASTIC NUT ON DOOR FIXINGS

GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.

Also suitable for Twin Point indicator fixings.

£0.24 exc vat

£0.29 inc vat

CHECK ARM SEAL L/H 1986 ON

CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

£3.50 exc vat

£4.20 inc vat