£75.00 exc vat
£90.00 inc vat
In stock
£75.00 exc vat
£90.00 inc vat
In stockRecommended usage 1 x HMP441010 to fit one mini.
non genuine-This is the R/H vertical part panel only that has the shock absorber mounting turrett. See 14A9558/9 for complete panel
Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623
Non genuine rear companion bin for external hinge cars. These are supplied without the ash try mount.
Non genuine repair panel for below the lights and above the rear valance, fits all models. Left hand side.
Rear seat belt anchor mounting point as found on later cars. This panel needs to be welded into the C post.
the left hand waist rail that is supplied on a new bodyside from us.
Acts as a stiffener on the inside of the bodyside between the rear seat pan and the B post just under the rear opening side window
this r/h waist rail is alreday fitted to a new bodyside CZH430 .
It acts as a stifener on the inside of the bodyside just below the rear side window for strengthening between rear seat pan and B post
This rear bulkhead panel is the actual panel the rear passengers back rest against where the upright seat squab is positioned. Not always carried in stock but usually available to special order--this is done to the last factory pressing with the loca...
Non genuine body side skin from door back and below window line for the left hand side
genuine rear lower back panel for MK2/3 on, which goes up as far as lower edge of backlight seal ridge
Non Genuine metal battery box. always going rusty owing to the location of where it is fitted. Requires welding in place and preferably painted or a protective coat. Remember to check if the battery cover, strap and clips need changing. Popular afte...
Non genuine body side skin from door back and below window line for the right hand side
the rear lower NON genuine corner section of the rear valance on vans.estates.travellers and pick ups L/H --See MS23 for centre section
The rear doors of the Mini Van and Wagon are the same except on the Woodie were a wood frame is screwed to the sheet metal. The door has a inner and outer skin and should have drain holes in the bottom. When these plug up the resulting rust always ...
rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623
floor pan front to rear for the left hand side only to the correct floor shape before 1990-1 rib design change---ideal for MK1/2 restoration with original 4 flute indentation. This has the carpet stud brackets plus underside slinger bracket and mul...
Floor pan front to rear for the right hand side only to the correct floor shape before 1990-1 rib design change---ideal for MK1/2 restoration with original 4 flute indentation. This has the carpet stud brackets plus underside slinger bracket and mult...
Genuine repair panel which is about 2.52 high from bumper mounting seam and
includes hinge holes and lower part of bootlid surround channel. Full width panel for any saloon.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.