£100.00 exc vat
£120.00 inc vat
In stock
With only one compound option and with all tyres being produced with 5.5mm tread depth, the AR-1 is positioning itself in amongst the gre...
£100.00 exc vat
£120.00 inc vat
In stockRecommended usage 4 x TYRE31 to fit one mini.
Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.
EU label informat...
The Yokohama 165/70 continues to be the best performance street tyre on the market.
EU label information
N/A
The ultimate well priced track day tyre. Great in the dry but not that hard wearing. The 165x55x12 is reputed not to be as good in the wet as the A539 TYRE17 which is 165x60x12. For competition use only.
EU labe...
Deep polished dish wheel with 68mm centre cap hole and takes normal CN5 type nuts
The Mamba design goes way back to the sixties. The design is, in fact, so unique that you will only see Mambas on Minis! Unusual silver spokes are highlighted by polished outer rims and a chrome MAMBA logo on the centre cap. Available in 5" and 6" wi...
Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tire rub on the inside. Spacers are sold by the pair, and include longer (2.25") wheel ENJO1039 studs. Cars fitted with spacered ...
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...
Fits original 10" steel wheels for that stock, very original look. There is a reproduction made in chrome. See 88G337.
Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".
Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.
Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not use air tools or a multi 12 point socket to avoid damaging the wheel nut. Original nut...
If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...
Often used by by racers because it has a true 11/16" hex head whereas the later
type NAM9075 has a s/steel cover making it an odd size which is why they often get damaged. You must use a 6 sided socket and not a multi sided 11/...
This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.