(¥20) £20.00 exc vat
(¥24) £24.00 inc vat
In stock
(¥20) £20.00 exc vat
(¥24) £24.00 inc vat
In stockRecommended usage 1 x ALA6664 to fit one mini.
non genuine small lip om front of Mk2/3 bonnet
this lip holds the upper grille moulding on Mk2 saloons right up to the last cars. Fitted to all our bonnets except van types and MK1 saloons it is usually found on any new bonnet and is tacked/...
non genuine small lip om front of Mk2/3 bonnet
this lip holds the upper grille moulding on Mk2 saloons right up to the last cars. Fitted to all our bonnets except van types and MK1 saloons it is usually found on any new bonnet and is tacked/...
British Heritage produced as original equipment, this Bonnet will fit all models beginning with the MK3. It is distinguished from the early models by the hinge location 1.25" from the edge and the lip for mounting of the upper grille moulding.See [l...
The NEW MKI bonnets from Original tooling are now available They are being made from the original tooling and absolutely correct. The exact contours, hinge location, etc. etc. fits all '59 thru '67 models of the Mini.
The front hood or bon...
For vans and pickups this had later type hinge positions 1.25" from the edge as per the saloon but did not have the extra lip for the bonnet upper grille moulding which was never fitted as standard---Mk1/2 variants had the hinges in a different posit...
This is the guide plate for the bonnet locking pin, now in stainless steel.
This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...
Called the rear bonnet seal it actually sits in the windscreen front scuttle panel on all minis up to 1991. This is the shape and size neoprene foam seal that we have found works best and has an adhesive backing to make fitting easier and less messy.
A pair of bonnet hinges for mk3 saloons after 1971 unpainted
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...
When they introduced negative earth sytems for the MK3 cars they had to put these stickers on the cars to warn people as all previous models were positive earth which caused havoc with people trying to fit radios and other electrical equipment with t...
Black rubber bung to hold the bonnet prop in place on MK1/2 minis.
Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).
Quick Release Bonnet Hinges , MK3.one pair
Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...
This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...
This is the seal that goes on the front of the bonnet to stop rain getting at
your electrics or causing rust and was fitted to every mini and Clubman.
Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...
This is the bracket on the inner wing to put your bonnet prop into when the bonnet is in the open position.
Four tailor made felt pieces to fit in the segments between the bonnet strengthening webs to allow maximum under bonnet clearance.
See FELT860 for spray adhesive. These are about 1cm thick and the original very thick sound dea...
This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the lat...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.