(¥0) £0.28 exc vat
(¥0) £0.34 inc vat
In stock
(¥0) £0.28 exc vat
(¥0) £0.34 inc vat
In stockRecommended usage 4 x CMZ204 to fit one mini.
All minis with sliding type windows had this type of metal cover for the door striker plate.
Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.
Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!
The gasket that sits behind the door stiker on all wind up window type minis
on the B post.
MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)
Special thread cutting screw 1/4 UNF 1.25" (31mm) long.
Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...
New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...
4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.
Sold seperately as
top right CZH202MS 1 r...
Lower internal door hinge for either side.
Fits all wind up window type doors from 1970 on.
Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.
Also suitable for Twin Point indicator fixings.
Holds the window regulator to the door on wind up window minis from 1970 on.
Also holds fog lamp bracket to rear valance. 1/4" unf with 1/2" thread on
panhead type screw.
The square/oblong plastic finisher that goes on the door where the safety lock is located on Mk3 1970 on cars with wind up windows. This is the original style which changed on the SPI and then again on the MPI. If you have a SPI or MPI from 1991 on, ...
This is the classic upgrade of the '60s. Steel wire checkstraps" will actually hold your MKI/MKII doors open. Sold per pair.
Sliding window Mini models all must now use these black plastic locks for the windows. Our special kit includes a complete set of all the pieces: 4 latches, rubber seals, screws and chrome nuts.This kit is a great saving over buying all the parts ind...
These Mirrors are made in the U.K. by Tex. Slightly convex lens gives excellent rearward visibility. Right side, left is GAM218A. For fitment to laters cars originally fitted with plastic mirrors, use fitting kit M90999.
See als...
The plate fits into the white 14A6833 door buffer to protect it from screw damage. Now made in stainless steel it is countersunk one side to take the screws.
The original bracket that the screws fixed to is no longer available a...
Hinge for any mini with external hinges and uses gaskets BMP135 on A panel and and ALA7844 on door. Supplied with new studs/nuts and washers for fitment but if you need spares see 14A6818BOLT. A hinge and bolt a...
Perhaps one of the most endearing features of the early Minis with sliding windows are the external door hinges, that is until they are worn beyond repair and sag to the point that the door won't close. Replacements are available individually, but th...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.