FAN CONTROLLER ELECTRIC KIT
KLM1417

(¥83) £82.74 exc vat

(¥99) £99.29 inc vat

In stockIn stock
A special spacer section (25mm bore)fits into the top hose and the control unit has a heat setting screw to calibrate your own water temperature. This whole unit will control your existing fan(even a Kenlowe) The top hose will have to be cut to fit this unit but all clips and fitting instructions are supplied. This part however is not made specially for the mini and is really difficult to fit into the S top hose GRH247 owing to the hose shape and length, and is therefore not advised unless you prepared to plumb to your own design.

(¥83) £82.74 exc vat

(¥99) £99.29 inc vat

In stockIn stock

Recommended usage 1 x KLM1417 to fit one mini.

People also bought products

MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...

Designed to reduce the horsepower drain and slow down the water moving through the radiator to allow it time to cool, its very important for the higher RPMs we run today. This oversize pulley is 4.2" diameter, earlier cars used a 3.875" wide pulley. ...

Replacement electric fan assembly complete with laser cut metal brackets so that it can be mounted to the original mounting points of the standard fan

uses 9" blowing air fan.

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...

Black Silicon Top Radiator Hose

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit any 850/998/1100cc minis plus...

Black Silicon Bottom hose- Unless you're heavily into the concours scene you'll love these hoses! These silicone hoses will withstand higher temps and pressures and will last virtually forever! And if you ever had to replace a lower hose you'll appre...

Radiator hose kit for all pre 1989 1275GT Clubman Minis where the top hose is slightly longer. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney black Silicone that should last forever and not degrade with heat, t...

Made for small bore Mk2 minis except clubman these super flexible hoses are easier to fit than rubber and last so much longer. See C-GRH003 also for all 998 Clubman and original MK1 radiator with longer top hose which measures 7" long (c...

Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...

Concentrate multi-metal corrosion inhibitor and coolant enhancer providing the following benefits:



• Helps to maintain coolant flow in radiators.

• Reduces deposit formation in radiators.

• Provides powerful corro...

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

2 per engine-Longer lasting poly type radiator grommet in Yellow for 1974 on.

These were first used on the one piece cowling from 1974 on. These fit on the lower retaining bolt and 2 are required but sold singly.

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engine,which used the longest hose.<...

A must for any tuned road car. A full electric fan kit, Mini Spares helped to design with precision made brackets to mount directly to the mini radiator to suck air in order to maximise efficiency and cooling. It therefore does not block cold airflow...

"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London. This is the C-ARA4444B radiator plus the sender unit for later cars 1991 on. Their design has been proven to be the best 4-core at...