(¥36) £36.08 exc vat
(¥43) £43.30 inc vat
In stock
(¥36) £36.08 exc vat
(¥43) £43.30 inc vat
In stockRecommended usage 1 x MSA344-1 to fit one mini.
Courtesy switch for MPI minis from 1996 when the wiring was changed from bullet type to spade connection. This is the switch that fitted into the A post to turn the interior light on and off, the earlier switch is no longer available so if you have a...
IGNITION BARREL TO FIT 13H337 SWITCH. MK1/2/EARLY MK3. ONE BARREL,TWO KEYS
circuit breaker for safety as required in motorsport
The switch has to be accessible from inside and outside the car.The external trigger should be located on the windscren scuttle panel -preferably the drivers side . It should be clearly ma...
MK1/2/EARLY MK3. 3 position spring loaded type. Comes with barrel.
For barrel only use part number 24G1345.
Headlamp switch fits MK1/2/ earlyY MK3, Toggle type also known as bat handle type, 3 POSITION. BLADE CONNECTIONS.
WIPER SWITCH,FITS MK1/2/EARLY MK3.TOGGLE TYPE.2 POSITION.
Battery cut-off switch. FIA approved
Most race sanctioning bodies require the use of this special (diode protection device) cut out allowing the switching off whilst the engine is running without damaging the electrics. The switch has to be ...
Rocker light switch with blade connectors on the back. FITS MK3.
This turn signal indicator switch also includes a black button on end for the horn push and a for and aft movement for the activation of high beams. The switch is used on most MK3 Minis and can be distinguished by the use of a plug for interconnectio...
Rocker switch for MKII one-speed wiper motor; blade connectors on back.
This part often fails and if the conection points look dodgy replace the socket 520161 which also has a small loom.
10 security features
remote control alarm or keyless entry system when used with central locking kit MSSK2001 it has 10 security features which can be turned on/off by accessing the programme mode. All the usual alarm features ...
Kit consisting of LA1009 halogen driving lamps approx 170mm wide by 58mm deep with 2 stainless steel brackets.
Genuine L/H lamp.Beware of cheaper inferior lamps for sale.
Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp.Supplied with gaskets. Many people now change the upper lens to the more fash...
Domed shape indicator lamp for all minis with single filament bulb, this is the aftermarket type with a white plastic lens and for glass type there is only a side asnd indicator type lamp which is 2A9013 but a white glass lens is [link]3...
Almost any screw will hold the chrome headlamp bezel on, but only one is correct! These screws are stainless steel and will never corrode plus they have the little rubber washer on the backside so that the screw will not fall out when trying to fit ...
Genuine R/H lamp. Beware of cheaper inferior lamps for sale.Fitted from 1976 on as standard equipment this was the Lucas style lamp with the built in reverse lamp. Supplied with gaskets. Many people now change the upper lens to the more fashionable w...
Two of these plastic lens that hold festoon bulbs (GLB239) are mounted in the metal cast number plate housing (13H6900) on all MK3 bootlids from 1970on. Sold individually with bulb LESS FIXING SCREWS.
See PMZ206 for screw replac...
All Minis require an earth strap from the engine to the body and from 1959-1996
they fitted from the gearbox to the subframe. When they introduced the twin point in 1996 it was moved to the upper engine stabiliser arm. About 13"LONG.
If your rusted old headlight bucket is getting to you, don't waste time trying to salvage it when new metal reproduction metal buckets are AVAILABLE.
With a headlamp rim fixing bracket 37H7421 attached
Whether you are ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.