REVOLUTION 5x12 WHEEL INC REV 09 S/S NUTS
REV03

(¥80) £80.10 exc vat

(¥96) £96.12 inc vat

In stockIn stock
True 5x12 Revolution whel with stainless steel wheel nuts and washers which cost double the standard chrome type which pit and rust.

Pre 2004 revolution in their wisdom supplied some suppliers with 5.5 wide wheels with the same offset so the...

(¥80) £80.10 exc vat

(¥96) £96.12 inc vat

In stockIn stock

Recommended usage 5 x REV03 to fit one mini.

Recommended products

The most popular selling tyre in the UK for Minis with 12" wheels. The tread pattern gives good wear characteristics providing good wet and dry weather grip.



EU label information



Rolling resistance F

Wet...

The TYRE01 (FK06G) tyre is now no longer being made by Falken, the new ZE914 is now being supplied instead.

Produced by the sixth largest tyre manufacturer in the world, the ZE914 features an innovative asymmetrical tread design...

Kit contained products

Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".

Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.

People also bought products

Nankang Green Sport Eco Plus, 165/60/12.



EU label information



Rolling resistance F

Wet Grip B

Esternal Noise (dB) 70

NA-1 Eco 145/70/12



– New breed fuel efficient design

– Minimized rolling resistance

– Economical driving

HEX HEAD NUT FOR 2010 ON MAMBA WHEELS BOTH 6X10 AND 6X12 WHEELS

Chrome wheel nut for all original Mamba and Revolution wheels except 13".



Overall length is 48mm

Sleeve length is 32mm

Sleeve diameter is 13.8mm

The washer is 2.3mm thick and outside diameter is 24mm

A winter tyre for compact and middle-class vehicles: the triple v-shaped tread design of SV-3 tyres help with drainage and the zig zag pattern helps with grip on snow, the silica compound also aids grip on icy roads.



It is advisea...

For the latest 12" Revolution whels with a 67mm centre cap introduced on 2004

Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tire rub on the inside. Spacers are sold by the pair, and include longer (2.25") wheel ENJO1039 studs. Cars fitted with spacered ...

The most popular selling tyre in the UK for Minis with 12" wheels. The tread pattern gives good wear characteristics providing good wet and dry weather grip.



EU label information



Rolling resistance F

Wet...

50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).

Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".

Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.

Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not a multi sided socket to avoid damaging the wheel nut. Original nuts from the factory u...

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.

If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...

When the 12" steel wheel was introduced as standard in 1984 they changed the wheel nut seating angle to 60 degrees.

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair and include longer wheel studs. Spare studs are ENJO-1039.

If you ar...