Fits the 21A1507 handbrake quadrant on the radius arm and held on by 21A1513 clip.

($3.17) £3.17 exc vat

($3.80) £3.80 inc vat

special double coil spring washer which fits on the rear hanbrake quadrant on Hydrolastic cars only.Known as a thackery washer

($0.39) £0.39 exc vat

($0.47) £0.47 inc vat

MAINTENANCE FREE BALL JOINTS - CAR SET

C-GSJ166KIT

Set of 4 High quality Japanese sealed ball joints.

Developed and tested over a period of three years, the original concept was to manufacture a high quality product, similar to those used on modern vehicles. Unlike the current des...

($220.40) £220.40 exc vat

($264.48) £264.48 inc vat

MINISPARES EVOLUTION RUBBER SUSPENSION CONE

FAM3968EVO

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

($40.88) £40.88 exc vat

($49.06) £49.06 inc vat

SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER

GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat

SUSPENSION KNUCKLE FRONT ONLY 1990 ON WITH POLY BO...

GSV1264EVO

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat

TOP ARM REBOUND BUFFER POLY MOUNT ON STAINLESS BAS...

2A4267POLY

Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base

($2.93) £2.93 exc vat

($3.52) £3.52 inc vat

POLY UPGRADE TRACK ROD END/KNUCKLE GAITER

21A425EVO

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS44BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

($5.92) £5.92 exc vat

($7.10) £7.10 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS43BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

($6.28) £6.28 exc vat

($7.54) £7.54 inc vat

REAR SUBFRAME FITTING KIT INC TRUNNIONS PRE 1976

MS42

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis up to 1976 on but the later kit MS41 will fit early...

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat

SUBFRAME TRUNNION FOR REAR OF REAR SUBFRAME MINISP...

2A5819MS

Mini Spares product,metal trunnion to hold the 2-2A5818MS bushes on the rear subframe.

Originally there were 4 of these trunnions on the subframe but in 1976 (MK4)the front 2 brackets were strenghened and enlarged to [link]21A2...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

CAMBER AND TOE REAR TRACK ADJUSTMENT BRACKETS

MS73EVO

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

($37.80) £37.80 exc vat

($45.36) £45.36 inc vat

BULKHEAD TO HYDROLASTIC PIPE ADAPTOR PLATE R/H

21A1522

Hydrolastic cars only this bracket clamps under the clutch pipe and top engine steady bulkhead bracket to retain the brake line and hydrolastic pipe.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

BALL JOINT EXTRA SHIM KIT (6 SHIMS)

2A4242

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

($2.48) £2.48 exc vat

($2.98) £2.98 inc vat

HILO FULL FRONT AND REAR CAR SET

HILO-SET

Full Hilo Front and Rear Car set. Many people will tell you why you should consider upgrading to the original classic "Hi/Lo" suspension so I should not be bashful in giving my opinion! The best reason is they are the only RAC homologated set availa...

($79.00) £79.00 exc vat

($94.80) £94.80 inc vat

7/16 NUT FOR BALL JOINT high tensile

FNZ507

High tensile nut for swivel pins - supplied in kits GSJ166MS and GSJ166.

($0.61) £0.61 exc vat

($0.73) £0.73 inc vat

DAMPER KAYABA GAS A JUST KIT (SET OF 4)

MSSK3015

Pair of front and rear gas self adjust dampers/shock absorbers at a special price

($125.51) £125.51 exc vat

($150.61) £150.61 inc vat

FRONT SUBFRAME TO BODY SPACER PRE 1976 DRY ONLY

21A2341

This is the metal packing piece for the twin bolt pre 76 front dry subframe tower mount.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

HYDROLASTIC ELBOW

21A1519

($46.88) £46.88 exc vat

($56.26) £56.26 inc vat

SLEEVE HYDRO FRONT SUBFRAME

21A1515

Plastic sleeve for protecting hydrolastic pipe - held in place by 21A1757 on rear; 21A1487 on front. Sold singly and 4 required per car.

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat

HYDROLASTIC MINI R/H RADIUS ARM RECONDITIONED(£100...

TRA31

Hydrolastic radius arm R/H reconditioned---old unit must have rear spring pin and axle stub undamaged for an exchange--unit must be in a condition that can be reconditioned.

($87.00) £87.00 exc vat

($104.40) £104.40 inc vat