CLUTCH PLUNGER UPRATED PRE VERTO MADE IN EN24
22A180

($17.60) £17.60 exc vat

($21.12) £21.12 inc vat

In stockIn stock
Upgraded pre verto clutch lever arm plunger. Surely to be copied by competitors as the early diaphragm clutch really needed a quality item to be remade. This is the carrier that holds the clutch release bearing and on the other end has a hole for the clutch lever arm 22A2204MS. Manufactured in the UK for Mini Spares quality product range.

($17.60) £17.60 exc vat

($21.12) £21.12 inc vat

In stockIn stock

Recommended usage 1 x 22A180 to fit one mini.
Clutch Housing - Qty 1

Alternative products
CLUTCH PLUNGER - PRE VERTO (Round End)
22A180MS

Clutch release plunger-This is the carrier that holds the clutch release bearing and on the other end has a hole for the clutch lever arm 22A2204MS.

If you are looking for a Mini Spares upgraded product see 22A180.

($7.43) £7.43 exc vat

($8.92) £8.92 inc vat
CLUTCH LEVER ARM AND PLUNGER RACE KIT PRE VERTO
C-22A2204

Pre verto race quality tuftrided clutch arm kit made in EN24T for any heavy duty diaphragm- special design plunger with arm to suit, hardened clevis pin and R-clip included.

($81.50) £81.50 exc vat

($97.80) £97.80 inc vat
People also bought products
EN24T PRE VERTO FLYWHEEL BOLT AND KEYWAY
22A747EVO

Pre verto flywheel bolt and keyway washer in EN24T



The bolt is CNC machined from stock EN24T steel with extra attention to the radius under the head to maximise strength.

($33.79) £33.79 exc vat

($40.55) £40.55 inc vat
VERTO PERFORMANCE CLUTCH COVER
C-AEG485

Verto 20% upgraded performance pressure plate which should be used with 190mm organic clutch plate C-AHT594 or the paddle type drive plate as used in racing C-AHT600. This pressure plate has a blue paint identifying mark and...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat
CLUTCH RETURN SPRING ANCHOR FOR MINISPARES LEVER A...
2A3601MS

Plate on the end of the PRE A plus long type clutch arm 22A2204MS to hold the return spring 1G5999. The clevis pin to hold this on the arm is CLZ518--this is the square type but for earlier tapered type Rover ar...

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat
CLUTCH LEVER ARM AND PLUNGER RACE KIT PRE VERTO
C-22A2204

Pre verto race quality tuftrided clutch arm kit made in EN24T for any heavy duty diaphragm- special design plunger with arm to suit, hardened clevis pin and R-clip included.

($81.50) £81.50 exc vat

($97.80) £97.80 inc vat
CLUTCH FLYWHEEL BOLT. SHORT RACE USE-SOLD SINGLY
C-2A3659

Race quality bolt-sold seperately- these shorter bolts hold the spring straps 2A3658 to the flywheel on diaphragm type flywheels only. Not for Verto flywheel.

Only tighten up to 16lbs per sq foot torque when using shake proof wa...

($3.08) £3.08 exc vat

($3.70) £3.70 inc vat
CLUTCH BOLT LONG COVER TO PRESSURE. RACE USE singl...
C-2A3657

Race quality shoulder bolts for the Mini clutch backplate to the diaphragm--sold seperately- heavy duty racing type EN16 tightenn up to 16lbs per sq foot torque when using shake proof washer or 18lbs and locktite. Use with C-2A3659 race ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
CLUTCH RELEASE BEARING-HEAVY DUTY PRE VERTO
GRB201EVO

Heavy duty clutch release bearing with a wider surface area, helps to spread even pressure on the clutch diaphragm and is favoured by racers.



small face with numbers stamp-face outwards, larger surface aera side face flywheel.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
SLAVE CYLINDER RETURN SPRING ANCHOR TAB
2A3600

Anchor tab for return spring that fits behind bleed valve on Slave cylinders, for Pre Verto clutches.

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat
CLUTCH PLATE ROAD/RALLY PERFORMANCE 180mm
C-AHT595

Mini Spares Performance clutch plate.

Great upgrade for increased performance engines,tested to 10,000rpm and to destruction for evaluation.

For diaphragm type clutch, pre verto. Great clutch plate and a better priced alternative t...

($53.31) £53.31 exc vat

($63.97) £63.97 inc vat
CLUTCH PLATE VERTO PERFORMANCE PLATE 190mm WIDE
C-AHT594

Performance clutch plate for road and rally Verto type - see also 20% upgraded pressure plate

($169.02) £169.02 exc vat

($202.82) £202.82 inc vat
PRE-VERTO CLUTCH PLATE
GCP204AF

Borg and Beck Clutch Plate,upgraded when fitted to ERA Turbo,great plate for lightly tuned cars from 850-1275cc.

Upgrades after this are C-AHT595 which is ideal for any std road use on 1275cc and C-AHT596 from AP r...

($34.50) £34.50 exc vat

($41.40) £41.40 inc vat
CLUTCH HOSE BRAIDED PRE VERTO
C-AJJ4025

Braided clutch hose for pre A+ cluches.

($15.41) £15.41 exc vat

($18.49) £18.49 inc vat
CLUTCH HOSE BRAIDED ONE PIECE. CLUTCH MASTER TO SL...
C-AJJ4025COMP

Delete the metal pipe and existing hose by fitting this longer one piece steel braided pipe which can be used for either early or verto clutches. A sensible modification for all mini owners.

($23.19) £23.19 exc vat

($27.83) £27.83 inc vat
CLUTCH DIAPHRAGM STANDARD ALL MINIS UP TO 70FT/LBS...
GCC103

Clutch diaphragm, blue for 1275/1100/998/850 Mini, pre Verto.

This part superseded the GCC102 850-1100 diaphragm.

($36.00) £36.00 exc vat

($43.20) £43.20 inc vat
FLYWHEEL BOLT PRE VERTO
22A747

The bolt that holds the flywheel to the crank on cars with a diaphragm type clutch. Locked in place by 22A1155 locktab on the 88G508 key washer.

($8.74) £8.74 exc vat

($10.49) £10.49 inc vat
CLUTCH FLYWHEEL STRAP BOLT SHORT-torque to 16lbs o...
2A3659

There are 3 of these shorter 5/16"unf bolts holding the spring straps 2A3658 to the flywheel on diaphragm type flywheels only. Not for Verto flywheel.

Only tighten up to 16lbs per sq foot torque when using shake proof washer or ...

($1.85) £1.85 exc vat

($2.22) £2.22 inc vat
PRESSURE PLATE FOR DIAPHRAGM CLUTCH steel TYPE PRE...
22A598

Steel Road weight 4.87lbs( 2.211kg) Pressure plate for diaphragm type clutches.

Now same uprated material and design of C-AHT230-

Great alternative and upgrade for the obsolete Cooper S and std mini type backplate for ...

($99.00) £99.00 exc vat

($118.80) £118.80 inc vat
PRE VERTO CLUTCH LEVER ARM HEAVY DUTY
22A2204MS

Long Pre Verto clutch arm.

Ensure you adjust the clutch properly otherwise the hydraulics are powerful enough to bend the ball end of the clutch arm, whether it be an old genuine or a new Mini Spares part. Replaces the old thin arm version 2...

($20.00) £20.00 exc vat

($24.00) £24.00 inc vat
CLUTCH BOLT LONG COVER TO PRESSURE torque to 16lbs...
2A3657

Shouldered 5/16"unf bolts for the Mini clutch backplate to the diaphragm, not for heavy duty use or racing. Only tighten up to 16lbs per sq foot torque when using shake proof washer (GHF323) or 18lbs if using flat washer and locktite. Only use [link]...

($2.09) £2.09 exc vat

($2.51) £2.51 inc vat
CLUTCH HOSE BANJO TYPE BRAIDED A PLUS
C-AJJ4025B

Steel braided clutch hose for verto type clutches with short lever arm.

($16.86) £16.86 exc vat

($20.23) £20.23 inc vat