EXHAUST VALVE WITH LARGE COLLET GROOVE 850 998 110...
AEA434

($3.71) £3.71 exc vat

($4.45) £4.45 inc vat

In stockIn stock
Early Large cotter groove exhaust valve. Most small bore engines seem particularly prone to burning valves, it is highly recommended to replace the exhaust valves when you do a valve job! This 1.0" valve fits most early 948cc, 998cc and 1098cc engines. These are better than the originals but for 998 Cooper 12G295 heads we stock the best quality AEA400 as well. These have the wide rectangular groove 8.65mm (.340") to accept the original 2A11 cotters which are now available as 2A11EVO.

($3.71) £3.71 exc vat

($4.45) £4.45 inc vat

In stockIn stock

Recommended usage 4 x AEA434 to fit one mini.
Cylinder Head 850CC, 998CC & 1100CC Pre 'A' Plus - Qty 4

Alternative products
VALVE EXHAUST 12G295 HEAD LARGE COLLET
AEA400

Best quality 1" exhaust valve for small bore cylinder heads as fitted standard to 998 Cooper. Higher grade than AEA434. Has a large 8.65mm (.340") collet groove 2A11 cotters which are now available as 2A11EVO.

($3.80) £3.80 exc vat

($4.56) £4.56 inc vat
People also bought products
VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...
2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
VALVE SPRING SEATS SHIMS 0.020"(set of 4)
SS1

Spring seat shims (set of 4), 0.020" thick (0.5mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT...

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
VALVE SPRING SEATS SHIMS 0.040" (set of 4)
SS5

Spring seat shims (set of 4), 0.040" thick (1mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT36...

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
VALVE STEM OIL SEAL AS USED ON MPI MODELS
LJQ101160

Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat
VALVE INLET for 12G295 CASTING 31mm
12G296

1.2"(31mm) intake valve for 12G295 Cooper head 998cc. Also a suitable upgrade for other small bore heads. These have the large collet groove 8.65mm (.340") 2A11 cotters which are now available as 2A11EVO. Correct grade exhau...

($3.76) £3.76 exc vat

($4.51) £4.51 inc vat
OIL FILLER CAP RED LATE CARS/METRO
GFE6007

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat
INNER VALVE SPRING BOTTOM COLLAR
AEA403

Standard inner valve spring lower collar, use C-AEA654.

These are no longer required when using our C-AEA526 and C-AEA527 range of silicone wire springs which are a slight interferance fit and friction ...

($1.89) £1.89 exc vat

($2.27) £2.27 inc vat
VALVE EXHAUST 12G295 HEAD LARGE COLLET
AEA400

Best quality 1" exhaust valve for small bore cylinder heads as fitted standard to 998 Cooper. Higher grade than AEA434. Has a large 8.65mm (.340") collet groove 2A11 cotters which are now available as 2A11EVO.

($3.80) £3.80 exc vat

($4.56) £4.56 inc vat
INLET VALVE EARLY COLLET TYPE 850 998
2A877

1.1" diameter intake valve for 948cc with 8.65mm wide groove for use with the original 88G616 top caps and 2A11 cotters which are now available as 2A11EVO.

($4.70) £4.70 exc vat

($5.64) £5.64 inc vat
VALVE SPRING TWIN SET STD USE
C-AEA525

160lbs on the nose at 400" for standard Cooper S or twin spring set ups. See C-AEA526 and C-AEA527 for later developed springs. These are ok for all standard uses but are improved and uprated over all original factory fitted...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
THERMOSTAT HOUSING GASKET LATEST TYPE
GUG705558GM

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
ROCKER POST SPACER SINGLE PLATE
2A515

Spacers for under the rocker pedestals are used mainly by engine tuners to allow tappet adjustment to be made where cylinder head mods have been carried out. 1.3mm/0.0512" thick, this can be used to hold locating screw on rocker post assembly but the...

($2.37) £2.37 exc vat

($2.84) £2.84 inc vat
VALVE INLET 88G459 COLLET TYPE
CAM6391

Goes with 12A1987 ex valve and should use AEA311 valve springs. 27mm. Pre A Plus for 850/998 with 88G459 small cotter grooves. Supplied singly, 4 required per engine.

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat
VALVE EXHAUST 8 PORT 30.9MM pre 2012 spec
C-AHT377

30.93mm(1.218") exhaust valve for 8 port pre 2012 specification only

this valve is longer than other A series varieties and plasma heat treated to eradicate wear from unleaded petrol.98.35mm total length. 3.879 "

The valves for the ...

($26.30) £26.30 exc vat

($31.56) £31.56 inc vat
ROCKER COVER BLUE T BAR KIT
SAC71BLUE

Anodised in blue for that different look.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
VALVE GRINDING PASTE (LARGE)
MSA1005

($3.90) £3.90 exc vat

($4.68) £4.68 inc vat
ROCKER COVER T BARS(PAIR)
SAC71

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
ROCKER COVER T BARS WITH CHROME FITTINGS
SAC71C

Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Ki...

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat