ROTOR ARM FOR 25D TYPE PERFORMANCE TYPE
GRA101

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

In stockIn stock
If you have an original 25D type distributor this is an upgraded arm (blade moulded and riveted )for performance use because all the other types available now are likely to fail at high revs. Because the blade is thin,or the rivet sometimes to long and not moulded correctly it becomes loose at the rivet and shudders or current can arch down to the distributor shaft causing electric engine failure. The material used on cheaper versions also contains more carbon blacking and is therefore more conductive. For a correct original old type trusty condenser see 47H5250

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

In stockIn stock

Recommended usage 1 x GRA101 to fit one mini.

Recommended products
CONDENSER RESIN BASED AS PER ORIGINAL LUCAS 23/25D
47H5250

RESIN BASED CONDENSER as per the original Lucas type made for the 23/25D type distributor as fitted to original Cooper S or Racers who want a trusty part or where originality is required,with soldered wire connections and correctly made foot to sit ...

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat
Alternative products
ROTOR ARM FOR 25D DISTRIBUTOR
GRA2101

See GRA101 for quality rotor arm

Most minis up to 1974 had the 25D type distributor fitted with side or top entry caps. This rotor arm fits both but for any sort of performance use they have failed because the contact blade on the arm is now...

($2.83) £2.83 exc vat

($3.40) £3.40 inc vat
People also bought products
IGNITION IGNITOR PACK 43D/45D/59D
LU143A

Electronic ignition conversion. For points type distributors, fixed or sliding. Negative earth only. Also, available for earlier 23/25D on Negative earth (LU142) or earlier 23/25D with Positive earth (LU142AP12).

ONLY use GCL217 coil for bal...

($147.99) £147.99 exc vat

($177.59) £177.59 inc vat
DISTRIBUTOR ELECTRIC EVOLUTION FOR 285-296 CAMS
C-27H7699

Pre A plus Electronic Ignition distributor, with vac unit modified to give better performance on any minis with 285/286/296 camshaft profiles

Brand New distributor complete with electronic conversion already fitted.

PRE A PLUS
<...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...
C-27H7698

Pre A Plus Electronic Ignition distributor with vac unit, modified to our specification in the UK to give best performance on any minis with std to 276 camshaft profile.

Brand New distributor complete with electronic conversion already fitt...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
PERFORMANCE 8mm PLUG LEAD SET RED
C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat
VAC UNIT 45d/59d FOR 1275cc
37H8379MS

Fits our 45/59d distributors, 1275cc as fitted to 12G4180 and ADU3825

Along with our distributor manufacturer we have found this to be the best for modern day fuels for all 45 or 59d distributor for 1275cc uses as...

($6.60) £6.60 exc vat

($7.92) £7.92 inc vat
MINISPARES OWN TWIN POINT IGNITION LEAD SET
GHT289MS

Set of 4 ignition leads from the original supplier to Unipart, suitable for all twin point minis 1997 onwards. For use with M4 type coil.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CONDENSER 45D/59D RESIN TYPE ORIGINAL
GSC110

original Lucas type RESIN BASED CONDENSER made for the 45/59D type distributor if you want a quality item rather than the cheaper inferior parts available. Filled with 3m of winding inside as per original Lucas but every copy analysed to date has ...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
CONDENSER RESIN BASED AS PER ORIGINAL LUCAS 23/25D
47H5250

RESIN BASED CONDENSER as per the original Lucas type made for the 23/25D type distributor as fitted to original Cooper S or Racers who want a trusty part or where originality is required,with soldered wire connections and correctly made foot to sit ...

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat
DISTRIBUTOR 25D WITH VAC ELECTRONIC - NEG EARTH
GEU930MS

NEGATIVE EARTH ONLY..Reproduction CONTACTLESS Distributor suitable for modern day fuels for 850 and 998cc pre 1974 with upgraded rotor arm "Negative earth only". A worn out distributor can cost you both performance and economy. Precise spark timing ...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat
DISTRIBUTOR 45D ELECTRONIC pre A PLUS NEG EARTH ON...
BAU1962MS

NEGATIVE EARTH ONLY..45D electronic(contactless)Pre A plus distributor .

replaces 41824A and 41418 plus any 998/1098cc up to the changeover of A plus type distributors. For best performance and tune we advise our electronic evolution versio...

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat
DISTRIBUTOR 23D ELECTRONIC NEG EARTH
12G2140MS

NEGATIVE EARTH ONLY. Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM but a new contact less electric copy of 40819 to cope better with modern day fuels. Fitted with the better Red rotor arm upgrade.Cheaper than many electro...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat
DISTRIBUTOR CSI 23/25D ELECTRONIC NON VAC PERFORMA...
C-27H7711

CSI-Ignition is a fully electronic ignition built in an original housing. You will have to remove the cap to see the difference! Neg earth only

After removing the cap you can select between 16 different curves by using

a screwdriver...

($225.00) £225.00 exc vat

($270.00) £270.00 inc vat
DISTRIBUTOR CSI 23/25D ELECTRONIC WITH VACUUM ADVA...
C-27H7710

CSI-Ignition is a fully electronic ignition built in an original housing. You will have to remove the cap to see the difference!

After removing the cap you can select between 16 different curves by using

a screwdriver. A bright flas...

($240.00) £240.00 exc vat

($288.00) £288.00 inc vat
SCREW KIT FOR 45D / 59D DISTRIBUTORS
57H5135

These are the screws needed to fix the condensor, points, base plate and vacuum to 45D and 59D distributors. For 23/25D type see 17H5106

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
SCREW KIT FOR 23 / 25D DISTRIBUTORS SET
17H5106

These are the screws needed to fix the condenser, points and base plate to 23/25D distributors. See 57H5135 for 45D type distributors.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
DISTRIBUTOR CAP RETAINING CLIP FOR 45D DIZZY'S
GDC136CLIP

Replacement distributor cap retaining clip for all 45D type distributors-sold per clip.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER
AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat
IGNITION MODULE FOR ELECTRONIC DISTRIBUTOR
NJC10001

Replacement Distributor ignition module fitted to all standard electronic ignition distributors (non injection) looking at the front of module, negative is on the left. positive on right and centre pin is not used.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
DISTRIBUTOR CAP FOR 123 ELECTRONIC DISTRIBUTOR
GDC123

If you have a new 123 ELECTRONIC distributor this is the replacement cap.

For earlier 123 distributors please see part number GDC123E.

Rotor arm is GRA123

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat
O RING SEAL ON DISTRIBUTOR HOUSING PRE A+
13H2792

the oil seal to fit on 12A1136 distributor housing. Pre A Plus

the earlier housing 2A612 did not have a seal.

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat