($7.56) £7.56 exc vat
($9.07) £9.07 inc vat
($7.56) £7.56 exc vat
($9.07) £9.07 inc vat
Recommended usage 1 x GWW515 to fit one mini.
Clear plastic windscreen washer tubing sold by the metre only. This is the larger size and was known as 1/4" bore because GWW201M is 1/8" bore. This hose is actually now known as 4.8mm which is nearer 3/16".
this was known as 1/...
Windscreen washer pump bracket for MK2 onwards cars with padded dash rail.
Rubber grommet/seal as supplied in GWW935 washer bottle, to seal to the pump.
Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.
Have yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.
Original ty...
Fitted in the engine compartment pre October 1988 until the introduction of GWW940 and in the boot from 1991 on. This large windshield washer plastic bottle was then moved to the boot area and mounts on the R/H rear wheel arch. Rectangu...
Has your windscreen washer bottle disappeared, or just disintegrated with age? This plastic washer bottle for early Minis with the Tudor logo has a 2" neck size, with internal tube and non return valve.
For originality see 17H253...
This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...
This is the metal bracket that holds most round shaped windscreen washer bottles from the 1960s which was fitted to MGB, Sprite and Mini but was in a black painted finish which got tatty when rusting so we made them in stainless steel for long life. ...
If your washer botle is in the boot this is the pump fitted originally to twin points 1996 on. Now only available without all the wiring and you just plug your socket on your loom direct to the pump
A pair of black wiper arm's for L/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
A pair of black wiper arm's for R/H/D with a hook type fitting introduced in 1990, together with a pair of Bosch 11" wiper blades
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Pair of 11" HEAVY DUTY wiper arms and blades for LHD cars MK3 1970 on and will fit RHD MK1/2 cars. This is where the wipers park on the right hand side as you sit in the car.
Pair of 11" HEAVY DUTY wiper arms and blades for RHD cars MK3 1970 on.
This is where the wipers park on the left hand side as you sit in the car.
This complete kit of 11" HEAVY DUTY wiper chrome/stainless steel parts is for RHD MK1/2 and all L/H/D cars where the wipers park on the right hand side as you sit in the car, dispose the nuts as they will be the wrong type for mk1/2 which had 6 sides...
Black wiper blade 11" long made to fit later hook type DKB101480/101490 arms only. Introduced in 1990 and fitted to all MPI cars. This super Bosch wiper blade, which we found to be the best available that we have tested in the market will fit hook t...
This is the spiral wound cable that is in the wiper rack tubes. It needs to be cut to length.
Total length uncut is 150cm.
For classic vehicles with self parking wipers.
We all love our classic vehicles and many of us use them all year round. This means facing the vagaries of the weather, and let’s face it, even summer weather is rarely as rain free as...
This 10"blade kit is for MK1/2 plus all left hand drive cars with Right hand park, but you will have to disgard the nuts if you seek originality as this kit has 8 sided for later type cars or fit MSSK030A which has 6 sided nuts. Chrome ...
6 sided chrome nut for MK1/2 wiper wheel boxes-This had a bycycle thread whereas the later MK3 had a metric thread and was 8 sided.
Also fitted Sprite MK1/2/3 Midget mk1/2 TR4/4A and TR5