MIRROR DRUM B1 CONVEX GLASS(FOR FLAT ORDER M40711)
M40701

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat

Out of stockOut of stock
often fitted to minis by local dealers supplying cars as an extra---the only give away is the shape and these are convex(IF YOU REQUIRE FLAT GLASS THESE CAN BE ORDORED)

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat

Out of stockOut of stock

Mirrors - Qty 2

People also bought products
DOOR MIRROR L/H STAINLESS STEEL CONVEX
GAM218A

These Mirrors are made in the UK by Tex. Slightly convex lens gives excellent rearward visibility. Left side. Right is GAM217. For fitment to laters cars originally fitted with plastic mirrors, use fitting kit M90997. See also

G...

($28.80) £28.80 exc vat

($34.56) £34.56 inc vat
OVAL WING MIRROR - CONVEX
M50201

some of these oval mirrors were fitted to cars in the 60s and 70s by dealers when the cars came from the factory without any mirrors at all.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat
REPLACEMENT MIRROR CONVEX FOR GAM217A AND 218A
GAM208A

convex replacement glass for the GAM217A/218A range of wider view mirrors.

available to order as very slow sales

($7.23) £7.23 exc vat

($8.68) £8.68 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
CLIP ON OVERTAKING MIRROR
MQT3

Stainless steel clip on overtaking mirror. This clips to the seam moulding on the UK drivers side only. Mirror size is 73mm x 103mm

($17.10) £17.10 exc vat

($20.52) £20.52 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
MIRROR PAIR OF GAM112/3
GS25317

Pair of stainless steel domed mirrors sold as GAM112 and GAM113 seperately

($56.10) £56.10 exc vat

($67.32) £67.32 inc vat
BARREL LOCK RETAINING CLIP (and fixing for 24A71 b...
PFR109

Clip for Door Handle required when changing barrel set. Heavy duty round spire clip specially made for the job.

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
DOOR BOTTOM INNER REPAIR SECTION L/H MK3 SALOON ON
MS34L

Non genuine L/H repair section

for wind up window type doors this is the lower 2-3" of the inner skin and the bottom of the door section that usually rusts out-includes a lip section where the outer skin flaps overlaps for fitment--new panel...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
PLASTIC NUT ON DOOR FIXINGS
GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

($60.08) £60.08 exc vat

($72.10) £72.10 inc vat
WEATHERSTRIP KIT L/H DOOR 3 PIECE MK1/2 WINDOWS
MSSK021

Sliding window type weatherstrip kit L/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder

($39.89) £39.89 exc vat

($47.87) £47.87 inc vat
DOOR HANDLE GASKET (SMALL) MK3
CZH1729

Genuine Mini Spares product.

This is the small gasket on the Mk3 wind up window door handle.

The larger one is ALA5795 and the boot lid uses a seal CZH1747.

($0.56) £0.56 exc vat

($0.67) £0.67 inc vat
MIRROR ARM TEX NO.9 LONG STRAIGHT ARM
M16009

Original Tex long straight arm, see also M16008 long curved arm. Height form mounting face is 85mm.

All early mini vans and saloons used a straight angled arm, this is the only arm available close to this shape,vans were black w...

($18.75) £18.75 exc vat

($22.50) £22.50 inc vat
ROUND CONVEX MIRROR(M50101)
8G8731

round head convex chrome mirror as fitted to early MK1/2 saloons. See 8G8710 for flat glass. Both use the Tex arm M16006 after the originals type were nade obsolete

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat
SLIDING WINDOW PLASTIC CATCH N/S/R
24A1197

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

($10.31) £10.31 exc vat

($12.37) £12.37 inc vat