BONNET OR BOOT SPRINGS BLACK

these BLACK spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in chrome. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you ...

($7.04) £7.04 exc vat

($8.45) £8.45 inc vat

BONNET OR BOOT TERRY TYPE SPRING CLIPS PAIR

MS122

These chrome spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in black. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you....

($8.64) £8.64 exc vat

($10.37) £10.37 inc vat

RUBBER BONNET HOOKS - SMALL

MS119

2" rubber hooks, sold in pairs. To hold down your bonnet, or whatever.

($4.64) £4.64 exc vat

($5.57) £5.57 inc vat

FIBREGLASS BOOTLID SKIN Mk3

MS111

Fibreglass bootlid outer skin.

($60.00) £60.00 exc vat

($72.00) £72.00 inc vat

FIBREGLASS MK1 BOOTLID DOUBLE SKIN

MS112

Not just a skin, but a complete MKI boot lid with inner skin. Lightweight, rustproof and well finished.

($141.00) £141.00 exc vat

($169.20) £169.20 inc vat

MK1 BOOTLID SINGLE SKIN TYPE NON GENUINE

28G110MS

Non genuine single skin MKI boot lid. Always fix your swinging number plate and hinges on for dummy fit and alignment before spraying.

If you have any doubt about the value of these panels- try having the rust and dents removed fr...

($179.25) £179.25 exc vat

($215.10) £215.10 inc vat

Mk1 BOOTLID - SINGLE SKIN TYPE

28G110

MKI boot lid manufactured by British Motor Heritage. Always fix your swinging number plate and hinges on for dummy fit and alignment before spraying.

The double skin Mk1/2 type 8G9270 introduced in december 1966 is only availabl...

($200.00) £200.00 exc vat

($240.00) £240.00 inc vat

BATTERY BOX SALOON - NON GENUINE

MS31

Non Genuine metal battery box. always going rusty owing to the location of where it is fitted. Requires welding in place and preferably painted or a protective coat. Remember to check if the battery cover, strap and clips need changing. Popular afte...

($26.40) £26.40 exc vat

($31.68) £31.68 inc vat

FIBREGLASS MK1 BOOTLID DOUBLE SKIN

MS112

Not just a skin, but a complete MKI boot lid with inner skin. Lightweight, rustproof and well finished.

($141.00) £141.00 exc vat

($169.20) £169.20 inc vat

MK1 MINI BOOTLID ALUMINIUM SKIN

HMP441051

MkI aluminium boot lid "skin only" panel. This panel is produced off the original tooling, ensuring good panel fit and integrity. Following the pressing of the panel it is hand finished by Heritage craftsmen, to ensure the highest panel quality.

($230.00) £230.00 exc vat

($276.00) £276.00 inc vat

MINI MIGLIA WHEEL ARCHES

MS127

Curley fibre glass Mini Miglia wheel arches, approximately 4.8." wide, with front edge 6.9" at widest point. Requires MS127FK brackets. Probably the largest wheel arches used on minis. Please note these are white gel coat not black and w...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

KEY BLANK FS MINI DOOR/BOOT KEY

17H2475

Blank Mini FS door key.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat

BOOT SEAL CLIP KIT

14A6585KIT

Used on all MK1/2/3 bootlids there are 26 little holes drilled around the inner edge to hold the seal on and this kit contains the 26 clips. For single clips see 14A6585. Later cars 1988 on fitted a seal to the body only. (CKE10018)

($10.53) £10.53 exc vat

($12.64) £12.64 inc vat

OVERCENTRE CLIP SPRING LOADED

MS117

Ideal for lashing down your tilt-front Bugeye nose! They latach and release quickly without tools. Strong enough to hold down panels even at racing speeds!

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat

BOOTLID SEAL. 1988 to 2000

CKE10018

This is the boot seal that actually fits on the car body which saved drilling holes in the bootlid. Fitted from about 1988 on.

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

BOOT HINGE GASKET LOWER

24A2176

These gaskets should be changed when replacing the hinges, this one goes between the bootlid hinge on the body, see 24A2175 also for upper on bootlid.

($0.34) £0.34 exc vat

($0.41) £0.41 inc vat

BOOT LID HINGE GASKET UPPER

24A2175

These gaskets should be changed when replacing the hinges-this one goes between the bootlid hinge on the bootlid. See also 24A2176 for gasket on body.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat

BONNET OR BOOT TERRY TYPE SPRING CLIPS PAIR

MS122

These chrome spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in black. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you....

($8.64) £8.64 exc vat

($10.37) £10.37 inc vat

BOOT LID SEAL EARLY TYPE (REQUIRES 26 x 14A6585)

14A6584

Bootlid seal for Mini <91. Held in place on the boot lid using 26 clips(part# 14A6585).When fitting, the lip part of the seal open end for clips should face the inner boot catch- (the open end of the seal facing inwards to the bootlid al...

($9.15) £9.15 exc vat

($10.98) £10.98 inc vat

BONNET OR BOOT SPRINGS BLACK

BS258

these BLACK spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in chrome. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you ...

($7.04) £7.04 exc vat

($8.45) £8.45 inc vat

NUMBER PLATE REAR MK1/2

14A6468

The MKI & MKII number plate panels 14A6468 are hinged at the top to swing out clear of the bumper when you open the boot lid. They were unavailable for years but now they're back. If you also need the hinges they are 14A6466...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

BONNET SKIN ONLY FIBREGLASS. NO LIP FOR MOULDING

MS114

Outer skin only without any fitting facility, used mainly by motorsport competitors or for specials where the method of fiting and retaining the bonnet by pins or straps is upto the individual.

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat

PAIR FRONT BRACE BARS MINI

MS106

These brace bars bolt to the front subframe, using one of the existing holes where the front panel originally mounted and then they bolt to the inner wing.

must be fitted to make the car road legal. Not suitable for Mini clubman

($40.80) £40.80 exc vat

($48.96) £48.96 inc vat

BONNET FIBREGLASS SKIN WITH LIP MK3

MS114A

Outer skin only without any fitting facility used mainly by motorsport competitors or for specials where the method of fiting and retaining the bonnet by pins or straps is upto the individual. This has the bonnet moulding lip so the grille upper surr...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

BOOT LID CABLE (SINGLE)

14A6740

These two simple cables are all that keep the boot lid from crashing down, damaging hinges, bumper and paint. When one fails we recommend replacing both to be sure of the same length. sold singly 2 required per car

37H3043 can be u...

($2.45) £2.45 exc vat

($2.94) £2.94 inc vat