M5 X 12MM CAP HEAD BOLT
SC105120

($0.06) £0.06 exc vat

($0.07) £0.07 inc vat

In stockIn stock
M5x12mm cap head bolt, in Chemical Black Finish, used in our MS73EVO adjustable rear brackets.

($0.06) £0.06 exc vat

($0.07) £0.07 inc vat

In stockIn stock

Recommended usage 1 x SC105120 to fit one mini.

People also bought products
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
M8 X 18MM FLANGED HEAD BOLT
FS108185

M8 X 18MM FLANGED HEAD BOLT

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat
FLANGED BOLT FOR HEAT SHIELD M6x10( rad bolt )
FS106107

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

($0.91) £0.91 exc vat

($1.09) £1.09 inc vat
BOLT 5/16" X 1" UNC SETSCREW
GFK5234

Bolt for CHM85 differential side cover. 1" long UNC useful for pre verto slave cylinder and starter bolt. Also 12A361 engine mounting bracket to alloy case.

($0.17) £0.17 exc vat

($0.20) £0.20 inc vat
BOLT OVERIDER AND WATER PUMP 5/16" x 1.25" LONG
SH605101

Bolt for the overider to lock plate at the back of the overider to secure it against the bumper.

Also has been used for the rear subframe trunnion 2A5819/21A2558.

Also used for the short water pump bolt.

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat
STEERING COLUMN PINCH BOLT
BH604111

Bolt for the bottom of the inner steering column to lock it onto the steering rack spline. This is a Rover special fitting bolt with a 1/2" plain shank to fit the inner steering column groove.

As it is an expensive bolt, for any other purpos...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
SETSCREW 5/16" X 3/4" UNF
GFK5184

Engine mounting to subframe bolt (2 per mounting). Some customers find longer bolt GFK5185 easier to use (1"long).

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat
TIE BAR BOLT
53K1031

Original Bolt with a special length shank for the front suspension tie bar to the lower arm. Always check this out for any signs of wear and replace accordingly.

Only wrong length parts were available in the market so these are the correct l...

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat
STEADY ROD BOLT FOR 21A1109 BAR TO ENGINE - 1 7/8"...
BH605151

Engine stabiliser arm to block bolt. This is the longer bolt that fits the engine stabiliser rod to the cylinder block.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
FRONT WHEEL CYLINDER BOLT 5/16" UNF 5/8" LONG
SH605051

The larger bolt that fits front wheel cylinders from 1964 on when the cars were fitted with 2 cylinders per wheel. The small bolt is SH604031.

A smart alternative is the easier to fit caphead bolt MSB0998. This bol...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
BOLT FOR BONNET LOCK KIT. METRIC M6x16
DYP10002

Metric bolt for the cable operated bonnet lock catch fitted to the slam panel which was standard on all twin points plus many single points.

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat
CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON
346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat
NUT METRIC FLANGED M8
FN108047

METRIC FLANGED NUT AS USED ON ENGINE ANCILLARIES FROM 1990 ON

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat
FLANGED M6 METRIC NUT
FN106047

Metric flanged metric M6 nut as used on engine, air con units and heaters from 1990 on.

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat
NUT PLAIN 1/2 INCH UNF HALF NUT
NT608041

Plain half thickness half inch nut as used on our C-AJJ3365 arms and steering rack adjustment nut for track rod ends.

($0.16) £0.16 exc vat

($0.19) £0.19 inc vat
PLASTIC NUT ON DOOR FIXINGS
GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat
NUT PLAIN 1/4" STAINLESS STEEL UNF
GFK3211S

Originally made to go on the heater tap studs on the cylinder head these are 1/4" unf for any other use to brighten uo your car. If you want the whole anti corrosion set of nuts and studs for the heater tap see C-STR285.

($0.15) £0.15 exc vat

($0.18) £0.18 inc vat
PLASTIC CLIP FOR BONNET PROP AND SUNVISORS ON 64/6...
GFK7344

Plastic clip for sunvisor 1964-5 and some bonnet props on early cars,was GHF1120 and ADA4370. the side clip on these models was ADA4484.

this set up was used with first plastic mirrrors and black rubber...

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
SPRING WASHER 5/16"
GFK1125

($0.11) £0.11 exc vat

($0.13) £0.13 inc vat