CARB REBUILD KIT FOR HIF44 TURBO CARB

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

($87.11) £87.11 exc vat

($104.53) £104.53 inc vat

T PIECE 5/16"

MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat

FLOAT NEEDLE VALVE & SEAT FOR HIF TURBO ONLY

WZX1095

Float needle valve for turbos fitted with standard HIF44 carb. Larger bodied valve.

Inlet size is 0.096". See also WZX1090 smaller bodied valve HIF6 MG Turbo

($21.56) £21.56 exc vat

($25.87) £25.87 inc vat

NEEDLE BDL SWINGING - 1300 HIF44 & KN ELEMENT

NZX8011

Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

NEEDLE BDD SWINGING TYPE - TURBO

NZX8004

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

CARB SPRING (RED 4.5oz) HS TYPE CARBS

AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat

BUTTERFLY SCREW

AUC1358

These screws fit all HS type carb butterflies to hold them on the throttle spindle

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

"T" PIECE 1/4" SU TWINS MTP001

12H889

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat

CARB SPRING YELLOW 8oz HIF CARBS ONLY

AUD4398

yellow identification spring which is heavier than AUD4355 and is an optional extra. For HIF carbs only.

($9.41) £9.41 exc vat

($11.29) £11.29 inc vat

SU CARB FLOAT TOP SCREW

JZX1394

The proper slot head screw for the SU dashpot and float lid 3/16 whitworth thread.

($0.87) £0.87 exc vat

($1.04) £1.04 inc vat

CARB GASKET SU FLOAT CHAMBER

AUC8459

Paper gasket for the float bowl of any HS2/HS4/HS6 carbs.

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat

CARB DASHPOT DAMPER HIF44 MINI COOPER 1990-92

LZX2085

The correct one for the origianl HIF44 carbs fitted to 1990-92 1275cc Coopers

($23.52) £23.52 exc vat

($28.22) £28.22 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

MAINS +10 1275CC A PLUS ONLY ACL RACE

C-AEM91886-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat

BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE

C-AEB91306-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($71.69) £71.69 exc vat

($86.03) £86.03 inc vat

ENGINE STABILISER BAR ADJUSTABLE AS FITTED TO TURB...

MSSK1305

Adjustable engine upper stabiliser rod.

Copy of ERA 1020 adjustable rod as fitted to the ERA mini turbo for clearance reasons. This adjustable rod takes the standard rubber bushes or equivalent and is a useful means of pushing the top of the...

($21.42) £21.42 exc vat

($25.70) £25.70 inc vat

MANIFOLD GASKET FOR FUEL INJECTED CARS

GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.

...

($5.10) £5.10 exc vat

($6.12) £6.12 inc vat

CENTRE MAIN STRAP & BOLTS - 1275cc BLOCKS

CMS13

Steel centre main strap for large bore engines, comes with longer high tensile bolts. Main top cap needs machining flat, no other modifications required.

On all performance A series engines it is essential to ensure accurate and as near perm...

($11.90) £11.90 exc vat

($14.28) £14.28 inc vat

ROCKER COVER T BARS WITH CHROME FITTINGS

SAC71C

Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Ki...

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat

TURBO MANIFOLD GASKET WITH EXHAUST INSERTS

GUG704063MG

Made especially for turbos to stop leakage and heat problems this gasket has metal ring retainer inserts on the exhaust ports. Sold singularly.

($12.68) £12.68 exc vat

($15.22) £15.22 inc vat