FLOAT NEEDLE VALVE & SEAT FOR HIF TURBO ONLY
WZX1095

£21.56 exc vat

£25.87 inc vat

In stockIn stock
Float needle valve for turbos fitted with standard HIF44 carb. Larger bodied valve.

Inlet size is 0.096". See also WZX1090 smaller bodied valve HIF6 MG Turbo

£21.56 exc vat

£25.87 inc vat

In stockIn stock

Recommended usage 1 x WZX1095 to fit one mini.
Carburettor HIF38 and HIF44 - Qty 1

People also bought products
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

£19.60 exc vat

£23.52 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

£1.16 exc vat

£1.39 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

£87.11 exc vat

£104.53 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat
T PIECE 5/16"
MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

£4.28 exc vat

£5.14 inc vat
JET ASSY HIF38 1275cc
WZX1455A

jet for HIF38 carb and is 0.090 size--for HIF44 see WZX1453A

£16.97 exc vat

£20.36 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat
NEEDLE VALVE SEAT MG TURBO
WZX1090

Needle valve and seat for turbo HIF6 carb.

Small body valve but has larger hole(0.125") for high boost engines.

Can be fitted to HS2/4/6.

£22.34 exc vat

£26.81 inc vat
HIF44 JET ASSEMBLY
WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

£25.76 exc vat

£30.91 inc vat
BEARING AND NEEDLE JET HIF
WZX1441

bearing and needle jet kit(not carb needle) for both HIF38 and HIF44.

.Quantity required for single carb-1 set.

£16.64 exc vat

£19.97 inc vat
CARB BUTTERFLY HIF38 DISC KIT
WZX1387

Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs

£14.40 exc vat

£17.28 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

£0.78 exc vat

£0.94 inc vat
CARB HIF38 SERVICE KIT
CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

£63.02 exc vat

£75.62 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

£3.27 exc vat

£3.92 inc vat
NEEDLE BFY SWINGING TYPE - HIF44 COOPER 90 on
NZX8071

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...

£8.25 exc vat

£9.90 inc vat
NEEDLE BDL SWINGING - 1300 HIF44 & KN ELEMENT
NZX8011

Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.

£8.25 exc vat

£9.90 inc vat
HIF GASKET AND SEAL KIT
WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

£14.81 exc vat

£17.77 inc vat
FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)
WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

£10.38 exc vat

£12.46 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

£6.10 exc vat

£7.32 inc vat