HIF GASKET AND SEAL KIT
WZX1505A

£14.81 exc vat

£17.77 inc vat

In stockIn stock
Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167
rebuild kit.

£14.81 exc vat

£17.77 inc vat

In stockIn stock

Recommended usage 1 x WZX1505A to fit one mini.
HIF44 Carburettor 44mm 1.75 inch - Qty 1
Carburettor HIF38 and HIF44 - Qty 1

People also bought products

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

Service kit for the following carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419.

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

Also denoted by its black plastic base. Twin HS4 carbs have 30 degree float bowl angles and therefore this jet is easier to fit as it is longer. L/H carb uses AUD9098A std single HS2 jet.



For...

SPI throttle body spacer - the gaskets are available as LZV1101GASKET

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...