CARB HS4 SERVICE KIT SU 1.5"
WZX1852

£55.31 exc vat

£66.37 inc vat

In stockIn stock
Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

£55.31 exc vat

£66.37 inc vat

In stockIn stock

Recommended usage 1 x WZX1852 to fit one mini.
Carburettors HS4 - Qty 1

Recommended products
CARB DASHPOT OIL FOR SU RANGE
BDR125

Correct and original thickness oil for SU carb dashpots.

£7.43 exc vat

£8.92 inc vat
Alternative products
CARB HS4 FULL REBUILD KIT WITH OVER RUN ON VALVE D...
CRK227

For HS4 single pre waxstat carbs with red jet this is the full rebuild kit with the spindle and plain throttle disc and bushes--- see CRK219 for disc with PLAIN disc. See WZX1852 for service kit

£81.32 exc vat

£97.58 inc vat
People also bought products
CARB HS2 SERVICE KIT FOR SU CSK51
WZX1851

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

£55.31 exc vat

£66.37 inc vat
CARB HIF38 SERVICE KIT
CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

£63.02 exc vat

£75.62 inc vat
HIF GASKET AND SEAL KIT
WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

£14.81 exc vat

£17.77 inc vat
CARB HS4 WAXSTAT TYPE SERVICE KIT
CSK65

For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

£83.91 exc vat

£100.69 inc vat
CARB HIF44 (TURBO) SERVICE KIT
CSK74

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

£66.87 exc vat

£80.24 inc vat
CARB HIF44 SERVICE KIT - EXCEPT TURBO
CSK75

Service kit for the following carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419.

£59.15 exc vat

£70.98 inc vat
CARB HS2/4 TWIN SERVICE KIT FOR SU TWINS
WZX1859

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

£83.64 exc vat

£100.37 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

£19.60 exc vat

£23.52 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

£7.65 exc vat

£9.18 inc vat
BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO
WZX1414

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

£30.09 exc vat

£36.11 inc vat
CONVERSION KIT waxstat to standard jet (linkage on...
BFS701SUL

Linkage set for Converting from waxstat to standard type jet for one single carb .

£20.28 exc vat

£24.34 inc vat
ANCHOR TAG ON CARB
12A4

£0.66 exc vat

£0.79 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

£87.11 exc vat

£104.53 inc vat
CARB HIF44 FULL REBUILD KIT EXCEPT TURBO
CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

£97.68 exc vat

£117.22 inc vat
PETROL PIPE BRAIDED 5/16" BORE X 2.5"
21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

£2.15 exc vat

£2.58 inc vat
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

£28.50 exc vat

£34.20 inc vat
JET BEARING KIT HS4
WZX1442

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

£21.77 exc vat

£26.12 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

£13.50 exc vat

£16.20 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat