CARB HS4 WAXSTAT TYPE SERVICE KIT
CSK65

£83.91 exc vat

£100.69 inc vat

In stockIn stock
For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

£83.91 exc vat

£100.69 inc vat

In stockIn stock

Recommended usage 1 x CSK65 to fit one mini.
Carburettor HS4 - Qty 1
Carburettors HS4 - Qty 1

Recommended products

Correct and original thickness oil for SU carb dashpots.

Alternative products

Complete rebuild kit for the FZX3013 waxstat type jet carb with butterfly spindle, plain butterfly and screws.

People also bought products

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167
rebui...

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

Service kit for the following carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419.

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

Return spring kit for HS4 carburettor spindle.

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

Linkage set for Converting from waxstat to standard type jet for one single carb .

For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit

Genuine Weber 45DCOE Carb, calibration from the factory is as below:





Choke 36

Throttle Plate Angle 78 degrees

Auxiliary Venturi 4.5

Needle Valve 200

Main Jet 145 Pump Jet 45...

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

plain butterfly with small hole at bottom for HS4 waxstat jet type carb and uses WZX177 spindle-or see kit full rebuild kit CRK121. This is usually fitted to FZX3013 replacement carb --same size butterfly on all...

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.