CARB HIF44 (TURBO) SERVICE KIT

CSK74

£66.87 exc vat

£80.24 inc vat

In stock

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

£66.87 exc vat

£80.24 inc vat

In stock

Recommended usage 1 x CSK74 to fit one mini.

People also bought products

CARB HS4 SERVICE KIT SU 1.5"

WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

£55.31 exc vat

£66.37 inc vat

CARB HS2 SERVICE KIT FOR SU CSK51

WZX1851

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

£55.31 exc vat

£66.37 inc vat

CARB HIF38 SERVICE KIT

CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

£63.02 exc vat

£75.62 inc vat

HIF GASKET AND SEAL KIT

WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

£14.81 exc vat

£17.77 inc vat

CARB HS4 WAXSTAT TYPE SERVICE KIT

CSK65

For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

£83.91 exc vat

£100.69 inc vat

CARB HIF44 SERVICE KIT - EXCEPT TURBO

CSK75

Service kit for the following carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419.

£59.15 exc vat

£70.98 inc vat

CARB HS2/4 TWIN SERVICE KIT FOR SU TWINS

WZX1859

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

£83.64 exc vat

£100.37 inc vat

BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO

WZX1414

Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

£30.09 exc vat

£36.11 inc vat

ANCHOR TAG ON CARB

12A4

£0.66 exc vat

£0.79 inc vat

CARB REBUILD KIT FOR HIF44 TURBO CARB

CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

£87.11 exc vat

£104.53 inc vat

PETROL PIPE BRAIDED 5/16" BORE X 2.5"

21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

£2.15 exc vat

£2.58 inc vat

CARB HIF38/44 ABUTMENT BRACKET

CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat

SPINDLE KIT HIF44-EARLY METRO

WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

£15.78 exc vat

£18.94 inc vat

FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE

WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat

FLOAT NEEDLE VALVE & SEAT FOR HIF TURBO ONLY

WZX1095

Float needle valve for turbos fitted with standard HIF44 carb. Larger bodied valve.

Inlet size is 0.096". See also WZX1090 smaller bodied valve HIF6 MG Turbo

£21.56 exc vat

£25.87 inc vat

FLOAT REP KIT for HIF CARBS

WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat

STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")

CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

£0.78 exc vat

£0.94 inc vat

MANIFOLD STUD FOR TWIN HS2 INLET

CHS2614

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

£1.83 exc vat

£2.20 inc vat

CARB NEEDLE SPRING HIF and HS4