Correct and original thickness oil for SU carb dashpots.

For HS2 single carbs this is the Complete kit of the parts required for an overhaul kit- if you do not require the spindle and disc and bushes see WZX1851

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

The butterfly kit for HS2 carbs and the spindle kit is WZX1310

The little spring that sits at the end of a spring loaded carb needle on late HS and all HIF carbs where applicable.

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...