BUTTERFLY / THROTTLE DISC HIF44 EXCEPT TURBO
WZX1414

£30.09 exc vat

£36.11 inc vat

In stockIn stock
Throttle disc only for HIF44-non turbo and if replacing the spindle there are 2 type, threaded one end only use WZX1127 for very early carbs 1980-81 only, but all later cars were threaded both ends use WZX1128

£30.09 exc vat

£36.11 inc vat

In stockIn stock

Recommended usage 1 x WZX1414 to fit one mini.
Carburettor HIF38 and HIF44 - Qty 1

Alternative products
THROTTLE DISC HIF44 TURBO ONLY
WZX1183

Throttle disc only for HIF44-if replacing the spindle there are 2 type,threaded one end only use WZX1127 and if threaded both ends use WZX1128

£15.17 exc vat

£18.20 inc vat
People also bought products
HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC
CRK162

£79.01 exc vat

£94.81 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

£1.16 exc vat

£1.39 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat
CARB HS4 SERVICE KIT SU 1.5"
WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

£55.31 exc vat

£66.37 inc vat
SPINDLE KIT HIF44-EARLY METRO
WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

£15.78 exc vat

£18.94 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat
SPINDLE KIT HIF44
WZX1128

spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF

£43.59 exc vat

£52.31 inc vat
HIF44 JET ASSEMBLY
WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

£25.76 exc vat

£30.91 inc vat
CARB BUTTERFLY HIF38 DISC KIT
WZX1387

Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs

£14.40 exc vat

£17.28 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

£0.78 exc vat

£0.94 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

£3.27 exc vat

£3.92 inc vat
NEEDLE BFY SWINGING TYPE - HIF44 COOPER 90 on
NZX8071

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...

£8.25 exc vat

£9.90 inc vat
NEEDLE BDK SWINGING - HIF6
NZX8010

Spring loaded needle for the HIF44 carb.

£8.25 exc vat

£9.90 inc vat
NEEDLE BDL SWINGING - 1300 HIF44 & KN ELEMENT
NZX8011

Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.

£8.25 exc vat

£9.90 inc vat
HIF GASKET AND SEAL KIT
WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

£14.81 exc vat

£17.77 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

£6.10 exc vat

£7.32 inc vat
HEATER AND CHOKE CABLE CLIP HIF CARB
CZK6491

Clip on the heater valve for heater cables on vehicles from 1990 where the in line remote heater valve was used. It has also been used as a clip for HIF carbs to hold the cable but the one from Rover is 13H3472.

£1.35 exc vat

£1.62 inc vat
NEEDLE BBW SWINGING - 1300 HIF44 K&N FILTER
CUD1144

If you have fitted our inlet and exhaust manifolds plus an RC40 exhaust to a stadard 1275cc engine this needle in a HIF44 carb will work great if coupled with a K&N pancake filter.

£8.25 exc vat

£9.90 inc vat
NEEDLE AAA SWINGING TYPE
CUD1000

A very usefull tuning needle for single and twin carbs when camshaft change for carbs with floating needles.

£8.25 exc vat

£9.90 inc vat