£16.95 exc vat
£20.34 inc vat
In stock
These fit left hand front and right hand rear
For the opposite side overriders, right hand front and left hand rear see 14A9923. Stainless grade Type 430ba.
£16.95 exc vat
£20.34 inc vat
In stockRecommended usage 2 x 14A9924 to fit one mini.
Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.
If you have standard overiders see kit MSSK011.
Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.
1 metre will do a car set of overiders (32" 0R 815mm actually needed). Each piece was originally cut to 3" (6" per overider). Some people have also used this for fibre glass wheel arch to body seal for neatness such as w&p arches.
When fitting bumper corner bars as per the old deluxe and Cooper S models you require this special angled spacer to fit under the bumper to give the bolt holding the corner bar a level seating platform.
This plate mounts on the back of the bumper for the overrider bolt to tighten up against to secure the overrider to the bumper on all minis fitted with any overriders except clubman specials.
Popular bumper to overider bar bolt but also fits oil pumps and gearbox cases. 1.5" long bolt.
Following are oil pump bolt lengths.
GFK5170 is 1.5" long Holburn Eaton and Sureflow.
BH604131 is 1.6250".
Genuine Mini Spares product-of which, some parts were supplied to Rover.
Stainless steel automotive grade unlike the poor looking chrome set up imported by some and sold cheaply. The "Deluxe" models of all Minis included bumpers with these ...
Mini Spares Stainless Steel Over Rider and corner bar kit for the front and rear of all 1997 on Minis with 4 driving lamps. This has shorter front corners bars than the original MK1 set, to allow for the extra 2 lamps fitted on MPI cars.
Com...
"Deluxe" Kit in stainless steel.
The "Deluxe" models of all Minis and Cooper S variants included bumpers with these fancy over-riders and corner bars. Our special kit is designed to provide you all the pieces to add to your existing bumpers ...
The "Deluxe" models of all Minis included bumpers with these fancy over-riders and corner bars. This rear only kit is designed to provide you all the pieces; including, all the bits and the bumpers!
Includes bumper, the complete overrid...
An aftermarket version of the mini bumper in stainless steel it has the original type open ends (Rover curled the sharp edges over) - BUMPER BOLTS ARE FITTED BUT NO NUTS -3 required metric M6 thread nuts FS106047
For top qualit...
The "Deluxe" models of all Minis included bumpers with these fancy over-riders and corner bars. This rear only kit is designed to provide you all the pieces; including, all the bits and the bumpers!
Includes bumper, the complete overrid...
This kit has 2 special overiders and 2 slightly shorter corner bars
for fitting to cars with 4 driving lamps when fitted as original equipment by the factory on all Twin point injection cars. This special kit was designed by Keith Dodd for ...
Black Bumpers can provide a great contrast to the rest of your car or they are ideal for painting your choice of colour.
Made in stainless steel to the original shape because the metal chromed variety suffer badly from rust and tarnish owing to their position on the car, even these should be cleaned regularly to keep appearances up and for longevity.
Black ver...
Popular bumper to overider bar bolt but also fits oil pumps and gearbox cases. 1.5" long bolt.
Following are oil pump bolt lengths.
GFK5170 is 1.5" long Holburn Eaton and Sureflow.
BH604131 is 1.6250".
This plate mounts on the back of the bumper for the overrider bolt to tighten up against to secure the overrider to the bumper on all minis fitted with any overriders except clubman specials.
"Deluxe" Kit in stainless steel.
The "Deluxe" models of all Minis and Cooper S variants included bumpers with these fancy over-riders and corner bars. Our special kit is designed to provide you all the pieces to add to your existing bumpers ...
Mini Spares Stainless Steel Over Rider and corner bar kit for the front and rear of all 1997 on Minis with 4 driving lamps. This has shorter front corners bars than the original MK1 set, to allow for the extra 2 lamps fitted on MPI cars.
Com...
Original genuine shape overrider corner bars, originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the left hand rear.
Overseas co...
Original genuine shape, fitted to all the MK1 deluxe cars and Coopers these overriders are now made in stainless steel to prolong life. They have pre drilled recessed holes to accept stainless steel corner bars unlike overseas copies.
These...
Original genuine shape overrider corner bars-originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the right hand rear.
Overseas co...
Genuine Mini Spares manufactured bumper from our own tooling that fits perfectly as per original ROVER bumpers. Better than the last genuine bumpers produced for Rover which is why we laid down tooling - BEWARE - most others available in stainless ar...
When fitting bumper corner bars as per the old deluxe and Cooper S models you require this special angled spacer to fit under the bumper to give the bolt holding the corner bar a level seating platform.
Also known as the overrider corner bars-originally fitted to deluxe Mk1 minis and Cooper variants. Now made in stainless steel for longevity they have found their way onto many later minis. This one fits the right hand front. For twin point cars a sh...
1 metre will do a car set of overiders (32" 0R 815mm actually needed). Each piece was originally cut to 3" (6" per overider). Some people have also used this for fibre glass wheel arch to body seal for neatness such as w&p arches.
Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.
Grille Buttons.
Take it easy, make it easy, do it easy. Upgrade your Mini regardless of year for "ease" of removal of your grille.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.