| Label | Part No | Description | Quantity | Comments | |
|---|---|---|---|---|---|
| 1 | 2A5866 | Pedal assembly RHD pre 1976 | 1 | N.L.A | |
| 2 | 2A3034 | Pedal bush for all | 2 | ||
| 3 | NAM3116 | Pedal assembly RHD | 1 | 1976 on | |
| 3 | NAM3115 | Pedal assembly LHD | 1 | 1976 on | |
| 4 | 21A2467 | Pedal box assembly single line brakes | 1 | N.L.A | |
| 5 | NAM8670 | Pedal box assy for tandem master cylinder was FAM4368 | 1 | N.L.A | |
| 6 | GPR104 | Pedal pad rubber, brake and clutch to 1976 / throttle 1976 on | 1 | ||
| 7 | GPR107 | Pedal pad rubber, brake and clutch to 1976 on | 1 | ||
| 7 | SZU10001 | Pedal pad rubber, brake and clutch upgrade 1976 on | 1 | Fitted as standard 1990 on | |
| 8 | 2A5880 | Shaft for brake and clutch pedal | 1 | ||
| 9 | GFK3322 | Lock nut for [LINK]2A5880[/LINK] | 1 | ||
| 10 | CLZ512 | Clevis pin master cylinder to pedal | 1 | ||
| 11 | 2A5652 | Pedal return spring | 1 | N.L.A | |
| 12 | GMC1008 | Clutch master cylinder, plastic body | 1 | Genuine AP | |
| 12 | AAU4969 | Clutch master cylinder, metal body | 1 | Genuine AP | |
| 13 | 513123A | Plastic filler cap | 1 | ||
| 13 | 17H3723 | Original type metal cap | 1 | ||
| 14 | GRK3007 | Repair kit - flat cap end seal & ring seal, was 8G8424 | 1 | Kit includes new plunger and later type ring seals | |
| 15 | GRK3004 | Repair kit with 2 ring type seals, 1985 on | 1 | Rubber seals only | |
| 16 | 31G279 | Sealing gasket | 1 | ||
| 17 | HF12 | Metal pipe with unions RHD, was 11”long | 1 | 12” long | |
| 17 | HF32 | Metal pipe with unions LHD | 1 | 32” long | |
| 18 | TM606031 | Clutch pipe unions | 1 | ||
| 19 | 13H300 | Clutch hose for [LINK]GSY110[/LINK] slave cylinder | 1 | ||
| 19 | C-AJJ4025 | Steel braided hose, pre A plus | 1 | ||
| 20 | GVP1009 | Clutch hose with banjo end, fits [LINK]GSY118[/LINK] | 1 | 1982 on Verto | |
| 20 | C-AJJ4025B | Banjo type steel braided hose, A plus | 1 | ||
| 20 | C-AJJ4025COMP | Steel braided hose, replaces hose and pipe | 1 | Fits either type | |
| 21 | C5192A | Banjo bolt for [LINK]GVP1009[/LINK] | 1 | ||
| 22 | 233220A | Copper sealing washer | 1 | ||
| 23 | 3H550 | Washer, banjo bolt to banjo | 1 | ||
| 24 | WE600101 | Shake proof washer | 1 | ||
| 25 | 2K8686 | Locking nut | 1 | ||
| 26 | ALA6593 | Blanking plate no holes | 1 | ||
| 27 | ALA6592 | Blanking plate one hole | 1 | ||
| 28 | ALA7530 | Blanking plate two holes | 1 | ||
| 29 | ALA6505 | Master cylinder base plate and engine stabiliser bracket | 1 | 1976-1998 | |
| 30 | 14A6733 | Master cylinder base plate and engine stabiliser bracket | 1 | 1959-1976 | |
| 31 | NAM9197 | Gasket bulkhead to plate | 1 |
MASTER CYLINDER THAT HAS 2 RING SEALS CAN BE IDENTIFIED BY A SINGLE GROOVE AROUND BODY BELOW FLUID RESERVOIR, AS PER DIAGRAM BELOW.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.