STUD FOR DIFF HOUSING 4 SYNC 3/8unc"x4.5"long
22G1834

£0.64 exc vat

£0.77 inc vat

Out of stockOut of stock
Gearbox differential housings before the fitment of bolts had had the following studs-3/8"unc stud for the casing and unf thread for for nut

Remote gearbox differential case used-

53K266 are 4.5" long -4 for remote now use TAM1617

53K1471 are 3"long 5/16"unc x3 or use 51K885

Rod change gearbox used-

22G1834 are 4.5" long 3/8"unc with 0.375" thread rod change only x2-use 51K282

CHS2624 are 3."long 3/8"with 0.250"thread x 3 or use BH506181 bolt

53K1471 are 3"long 5/16"unc x3 or use 51K885

£0.64 exc vat

£0.77 inc vat

Out of stockOut of stock

Gearbox Transmission - Qty 2
Gearbox Transmission Case - Qty 2

Alternative products
BLOCK STUD FOR FRONT OF 8 PORT HEAD & ROD CHANGE D...
51K282

The 8 port head is taller than standard A series heads so these MGB short head studs are used on the front--4 3/8" long 3/8" UNC stud with unf end for head nut. These studs are also used for rod change gearbox differential housings.

[link}53...

£5.22 exc vat

£6.26 inc vat
People also bought products
MINISPARES MOLYBDENUM CROSS PIN DIFF
C-AJJ3385

This is the original Evolution"Cross-pin" differential for the Mini.

Produced and sold by Mini Spares since 1994. It is a super heavy duty differential designed as a significant upgrade for reliability and strength to the standard units. Ove...

£231.00 exc vat

£277.20 inc vat
CLUTCH CASE STUD SHORT 3 REQUIRED
53K547

Stud to hold the clutch case to the engine and gearbox, 3 of required. 5/16"UNC thread for alloy fitment for gearbox with UNF thread the other end for the nuts. These are 1.5"long.

The 6 longer ones are 22A152.

These st...

£0.59 exc vat

£0.71 inc vat
ROLLER DOUBLE FOR MAINSHAFT IN GEARBOX.RHP GENUINE
AAU1365

Genuine RHP bearings. Not cheap Imported rubbish as sold under this part number.

This is the workhorse of the Mini gearbox. This double roller bearing supports the shaft where it transmits the power to the wheels. When this bearing goes, the...

£54.14 exc vat

£64.97 inc vat
GEARBOX TO ENGINE HALF MOON SEAL
AHU1959

Front main (half moon) black seal for all transverse engines. This is the flexible item as fitted originally after replacing the early red type that leaked.

See [link]CAM6548{/link] for the rigid seal designed by Rover for all their warran...

£2.05 exc vat

£2.46 inc vat
SELECTOR SEAL FOR REMOTE GEARBOX PRE '73
13H577

This seal fits the hole just above the diff housing where the rod comes out that holds the male gear change knuckle on remote and earlier magic wand gearboxes. Not on Rod Change types.

£2.45 exc vat

£2.94 inc vat