Early Large cotter groove exhaust valve. Most small bore engines seem particularly prone to burning valves, it is highly recommended to replace the exhaust valves when you do a valve job! This 1.0" valve fits most early 948cc, 998cc and 1098cc engine...

1.259" (32.00) dia x 3.57 long Exhaust valve.


Our race valves are produced in EN214N steel. They are stellite tipped and use the later narrow, single collet groove and current valve head shapes.Heat treated to eradicate wear from unleade...

Standard alloy thermostat housing. If you want the larger bore type as used on the Cooper with a sandwich plate see PEQ10019 housing GRH1140.

Requires thermostat gasket GTG101MS or GUG705558G...

Standard cast duplex gear set from the original AE supplier. for road use only.

Found to be the best fitting in Mini Mag feature Autumn 2007.

Driving the cam and controlling the timing relationships between the cam and the crank i...

Jet tube for twin SU carb: If you have a single carb, use AUD9098A although some people interchange with this one. This is for the left hand or front carb and identified by a green band.



20 degree float angle as per Sp...

Special flat nut (1-5/16" AF) for camshafts, uses 2A759 locktab.

Identified by its pink band this is for the right or rear carb on twin set ups

as standard on Cooper and S versions--a longer version of feed pipe for twin HS4 carbs is AUD9102



20 degree float ang...

For 1275cc engines with sandwich plate fitted except when PEQ10019 large bore thermostat housing is fitted.(fitted to HIF carb models between 1990-91). It has been used for these models however by extensive modifying around the horseshoe...