CARB JET WAXSTAT TYPE LATE MINI HS4
LZX1111A

£55.88 exc vat

£67.06 inc vat

In stockIn stock
Waxstat jets are easliy identifiable by the large alloy housing rather than the plastic end holding the fuel pipe. Fitted to HS4 carbs only the HS6 had its own LZX1119

£55.88 exc vat

£67.06 inc vat

In stockIn stock

Recommended usage 1 x LZX1111A to fit one mini.
Carburettor HS4 - Qty 1
Carburettors HS4 - Qty 1

Alternative products
CARB HS4 WAXSTAT TYPE SERVICE KIT
CSK65

For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

£83.91 exc vat

£100.69 inc vat
People also bought products
VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS
VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

£9.75 exc vat

£11.70 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

£19.60 exc vat

£23.52 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

£7.65 exc vat

£9.18 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

£1.16 exc vat

£1.39 inc vat
CONVERSION KIT waxstat to standard jet (linkage on...
BFS701SUL

Linkage set for Converting from waxstat to standard type jet for one single carb .

£20.28 exc vat

£24.34 inc vat
ANCHOR TAG ON CARB
12A4

£0.66 exc vat

£0.79 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

£87.11 exc vat

£104.53 inc vat
CARB HIF44 FULL REBUILD KIT EXCEPT TURBO
CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

£97.68 exc vat

£117.22 inc vat
PETROL PIPE BRAIDED 5/16" BORE X 2.5"
21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

£2.15 exc vat

£2.58 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat
CARB HS4 SERVICE KIT SU 1.5"
WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

£55.31 exc vat

£66.37 inc vat
CARB BUTTERFLY ANTISTALL HS4 WAXSTAT JET TYPE
WZX1324

plain butterfly with small hole at bottom for HS4 waxstat jet type carb and uses WZX177 spindle-or see kit full rebuild kit CRK121. This is usually fitted to FZX3013 replacement carb --same size butterfly on all...

£17.24 exc vat

£20.69 inc vat
CARB BUTTERFLY KIT 1.5"
WZX1323

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

£14.81 exc vat

£17.77 inc vat
JET BEARING KIT HS4
WZX1442

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

£21.77 exc vat

£26.12 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

£20.43 exc vat

£24.52 inc vat
SPINDLE KIT HS6
WZX1178

Not fitted as standard to the A seriers it found its way on engines as a great tuning aid on tuned engines. this is the spindle only and the disc is WZX1321.We suggest you use a complete rebuild kit if this area has worn-CRK223 which will have to be ...

£13.50 exc vat

£16.20 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

£13.50 exc vat

£16.20 inc vat
FLOAT REP KIT for HIF CARBS
WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat
SPINDLE KIT HIF44
WZX1128

spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF

£43.59 exc vat

£52.31 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

£11.70 exc vat

£14.04 inc vat