RADIUS ARM STUB AXLE DRY SUSP L/H
2A7364

£20.25 exc vat

£24.30 inc vat

Out of stockOut of stock
Genuine axle pin in the rear radius arm that holds your wheel bearings and hub--beware the threads are different for either side --this is the l/h side only.

£20.25 exc vat

£24.30 inc vat

Out of stockOut of stock

Rear Radius Arms, Cone Suspension - Qty 1
Rear Radius Arm and Bearings - Qty 1

Recommended products
CIRCLIP FOR REAR STUB AXLE
2A7352

heavy duty circlip on the rear radius arm stub axle to hold it in position

£3.50 exc vat

£4.20 inc vat
REAR HUB NUT LEFT HAND THREAD
FNN2410

Rear hub nuts on the mini are sided as the threads are different. This is for the LEFT hand rear. This has a left handed thread.

See NL611041 for the right hand nut.

£3.68 exc vat

£4.42 inc vat
WASHER FOR SHOCK ABSORBER DAMPER
AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

£0.22 exc vat

£0.26 inc vat
NUT NYLOC 3/8" UNF
GFK3323

£0.12 exc vat

£0.14 inc vat
People also bought products
MINISPARES EVOLUTION RUBBER SUSPENSION CONE
FAM3968EVO

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

£40.88 exc vat

£49.06 inc vat
SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER
GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

£4.88 exc vat

£5.86 inc vat
CAMBER AND TOE REAR TRACK ADJUSTMENT BRACKETS
MS73EVO

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

£37.80 exc vat

£45.36 inc vat
DAMPER BILSTEIN B4 GAS REAR
19-221700

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

£21.00 exc vat

£25.20 inc vat
HILO PLASTIC PLUG FOR TRUMPET
HILO-04

Plastic plug suplied in rear strut kit for HILO's.

£0.20 exc vat

£0.24 inc vat
SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS 4 GSV...
C-STR644A

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

£69.67 exc vat

£83.60 inc vat
REAR HUB LESS STUDS TO FIT ALL MODELS
RLH10021

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

£26.00 exc vat

£31.20 inc vat
ROAD RALLY RUBBER CONE SPRING - RED SPOT
C-STR687

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

£49.60 exc vat

£59.52 inc vat
RADIUS ARM DRY L/H RECONDITIONED(PLUS A £125.00 SU...
TRA32

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type from the 1959/60 era or any arms if they are bent or damaged. If you've ever had to rebuild a Mini trailing arm you know w...

£75.00 exc vat

£90.00 inc vat
RADIUS ARM REPAIR KIT
GSV1125

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

£9.98 exc vat

£11.98 inc vat
RADIUS ARM DRY R/H RECONDITIONED (PLUS A £125.00 S...
TRA33

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type 1959/60 era or bent damaged arms.

If you've ever had to rebuild a Mini trailing arm you know what a hassle it can...

£75.00 exc vat

£90.00 inc vat
COMPETITION RUBBER CONE SPRING - YELLOW SPOT
C-STR688

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

£52.00 exc vat

£62.40 inc vat
SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS
HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

£37.65 exc vat

£45.18 inc vat
SUSPENSION REAR ALLOY STRUT EXCEPT 13" WHEEL
21A1684

Genuine Mini Spares product, as per the last original Rover rear alloy strut fitted on the assembly line to minis with 12" wheels from 1984, 12.13" (308mm) fitted length. For, Mini Van/Estate and Pickup,many saloons from 1990 and late 80's seem to al...

£39.00 exc vat

£46.80 inc vat
RADIUS ARM SHROUD R/H
14A6615

Mini Spares product from own original tooling since 1989.This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the R/H rear radius/trailing arm.

This shroud uses 14A7091 rubber plug not suppl...

£6.30 exc vat

£7.56 inc vat
SUSPENSION KNUCKLE JOINT
GSV1118MS

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

£3.05 exc vat

£3.66 inc vat
SPLIT PIN FOR REAR HUB NUT & GCV1105 CV JOINT
GHF511

Correct size split pin for the rear hub nut and the early smaller type CV joint GCV1105 fitted to drum brake cars and cooper small discs.

Split pin for common clevis pin list

GFK101 for CLZ409 ...

£0.11 exc vat

£0.13 inc vat
HILO REAR UNIT RODS AND PLUGS - ONE CAR SET
HILO-01

These are the metal rods required to fit your Hilo kit to the rear of a mini.

£12.00 exc vat

£14.40 inc vat
WASHER FOR SHOCK ABSORBER DAMPER
AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

£0.22 exc vat

£0.26 inc vat
ST BUMP STOP RUBBER
AHH7074

Same bump stop as fitted to MGB, this was utilised by ST Works Abingdon to go on their bump stop kits C-AJJ3313/4007 for hydrolastic minis. Sold singly.

£6.10 exc vat

£7.32 inc vat