Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.

Man...

1.220" (31mm) dia x 3.57 exhaust valve.

Our race valves are produced in EN214N steel and are stellite tipped and use the later narrow, single collet groove and current valve head shapes.These valves are plasma heat treated to eradicate wear ...

If you drive A-Series cars long enough you will eventually have to replace the water pump bypass hose. These are the best quality available to fit without removing the cylinder head but these fluted rubber hoses have a bad reputation so if possible ...

That tell tale puff of blue smoke when you first start is an indicator of worn guides or seals. Valve guides should be replaced with every valve job.

Sold individually, these are the original quality Cooper S guides for use in any head espec...

Classed as the 29mm exhaust valve for 12G940 or A plus 1275cc heads this uses the single groove collets 88G459. Actually 29.3(1.154") Sold singly.

1.3" x 3.57" small collet intake valves, standard on Austin America, A-H Sprite, MG Midget and later A-Plus 1275cc Mini.

As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or wo...

Hardened unleaded valve seats for 1.15" 1275 exhaust valves.

Require a recess of 1.2495"(31.737mm) diameter, plus or minus 0.0005" (0.013mm), and 0.250"(6.35m) deep at ambient temperature of 20C.

Valve cotter triple groove to suit turbo exhaust valve with lager stem AHU1976 and top cap CAM6582.

Modern high lift, short duration camshafts have posed quite a few problems for the general public in recent years. Widely available performance valve springs were outdated overnight, as it became necessary to reduce spring crush. This, in turn, cause...

There is nothing special about these A Plus single valve springs. The valves were a longer fitted length but fitted the later 998 and all 1275 versions. They are an excellent replacement for any single spring 1275, Austin America, 1300, etc. sold sin...