As an engine wears, the clearance between the valve stem and guide increases; as this gets beyond tolerances the car will tend to smoke under deceleration (when you take your foot off the throttle). Good valve stem seals will allow for greater wear b...

New colour, PB104 bronze guides.Although Silicon bronze valve guides were used for their extremely good wear values, they were very hard and not user friendly when fitting. These valve guides are recommended when using all EN21 4N stainless steel val...

35.6 x 29.3mm valves in chrome stem with cast iron valve guides. This specification of cylinder head, based on used core castings, is modified in true Road sport style to maximise on-road performance for those wanting maximised drive-ability when ...

35.6 x 29.3mm valves in chrome stem with cast iron valve guides.

MPI specification of cylinder head, based on used core castings, modified in true Road sport style to maximise on-road performance for those wanting maximised drive-ability w...

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

Spring seat shims (set of 4), 0.040" thick (1mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT36...

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

1.2"(31mm) intake valve for 12G295 Cooper head 998cc. Also a suitable upgrade for other small bore heads. These have the large collet groove 8.65mm (.340") 2A11 cotters which are now available as 2A11EVO. Correct grade exhau...

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

Best quality 1" exhaust valve for small bore cylinder heads as fitted standard to 998 Cooper. Higher grade than AEA434. Has a large 8.65mm (.340") collet groove 2A11 cotters which are now available as 2A11EVO.

Sold individually.

To help rocker pad to valve stem alignment and reduce friction, the standard springs can be replaced with solid spacers and correctb shim set. The spacers and shim kit are sold as C-AEG392.

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

Goes with 12A1987 ex valve and should use AEA311 valve springs. 27mm. Pre A Plus for 850/998 with 88G459 small cotter grooves. Supplied singly, 4 required per engine.