SWITCH PANEL Mk2 CUMULUS GREY
ALE2960

£13.05 exc vat

£15.66 inc vat

In stockIn stock
ALSO SUITABLE FOR EARLY MK3 CARS THAT RETAINED THE DASH MOUNTED STARTER SWITCH AND TOGGLE SWITCHES CARRIED OVER FROM THE MK2 CARS.THE CHROME TRIM FOR THIS IS ALA6640

£13.05 exc vat

£15.66 inc vat

In stockIn stock

Recommended usage 1 x ALE2960 to fit one mini.
Dash, switch panels & ashtrays - Qty 1

Recommended products

BEZEL for mk2 on switch panel.



this item is satin finished, though can be polished by customer if required

People also bought products

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

door cappings in carbon fibre to compliment carbon fibre finished dash

Works Dash for LHD cars.

The later type more common dashes as used on the classic works Monte Minis and rally cars from ST Abingdon.


In crackle black finish.


Attaches to top and bottom parcel shelf rails either side...

Original looking centre speedo dash but only fits later cars with the large padded top facia pad as fitted to cars with the twin or triple clock cluster in front of the driver. This will need air vents as the holes are pre cut for them.

2 outer rings and 2 inner knobs which have to be stuck on.

Bezel for 24A2702 oval 3-gauge pod. This is the brightwork trim on the front of the plastic pod, it is held on with up to 14 whisker clips 14A9796. The clip to join the ends together for neatness is 24A472
<...

Chromed version of the standard demist vent on early cars where the ashtray is

mounted in the top and middle of the metal facia. Not for later cars with large

padded windscreen rails and ashtray in the front such as Mini Clubman and...

The black plastic pod which mounts the speedo and two gauges in the original central position. In the 1970's and 1980's a great number of Mini owners caught the customizing bug and a lot of Minis had custom dashboards installed. Now we're going the o...

The black vinyl covering that lays on your lower dash shelf. For cars after 1970 where the facia panel is not a full metal panel you must fit (link)DT3076(/link)

Fitted for safety regulations to all MK2 minis from 1967-80 except Sweden and Canada to 1975 (not any MKI or van and pick up). Later commercial type minis did have it fitted with 3 clock speedo pod. This is a hard foam pad at the lower edge of the pa...

Small details can make a big difference to a restoration. New covers for the defroster vents won't make your car run better, they probably won't even make the defroster work any better, but they sure look better. These come in flat black primer, read...

Originally looking centre speedo dash but only fits later cars with the large padded top facia pad as fitted to cars with the twin or triple clock cluster in front of the driver--In a charcoal charcoal black colour which looks more like piano black w...

Dash liners without air vents for either side of the speedo on deluxe versions such as the Cooper S with centre speedo and two gauges which are black vinyl covered as opposed to the painted type. Not for the single centre clock only.

see [li...

Pair of black painted type dash cards without airvent holes and for the single speedo only such as van or early saloon. If you have the deluxe type with oil and temp gauge see VGA4192 or in vinyl see ALE2927

Dash liner black painted cardboard without airvents and oval hole for deluxe speedo cluster.Not for single speedo only cluster.For Vinyl leathercloth type see ALE2927

Black painted liners for deluxe cars with air vents and central speedo and 2 gauges.

Ashtray that sits in the upper padded dash on all vehicles with 2/3 clocks positioned in front of driver. Early cars had flat plastic tray face whereas later cars had crinkly type face which is the only type available- They all fit the same.

Dash liners with air vents for on de luxe versions with centre speedo and two gauges which are black vinyl covered as opposed to the painted type. Not for the single centre clock only. The cardboard is cut out but the vinyl needs trimming when fittin...

Late type swith carrier with 4 square holes plus heater and choke cable holes-uses the ratchet type choke cable with D shape fitting--earlier cars used round hole for pull and push chooke cableCZH3591