The boards that sit on the facia tray of cars built after 1970 as a base for the vinyl cover VGA1995

Earlier cars had a full panel metal tray and do not require these support boards.

Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Right Hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut

Fitted for safety regulations to all MK2 minis from 1967-80 except Sweden and Canada to 1975 (not any MKI or van and pick up). Later commercial type minis did have it fitted with 3 clock speedo pod. This is a hard foam pad at the lower edge of the pa...

Pair of black painted type dash cards without airvent holes and for the single speedo only such as van or early saloon. If you have the deluxe type with oil and temp gauge see VGA4192 or in vinyl see ALE2927

Black painted liners for deluxe cars with air vents and central speedo and 2 gauges.

The classic Mini phone holder with USB replaces the existing chrome ashtray in the metal top dash rail



Key Features:



Plate is made from powder coated 3mm steel

Spring loaded clamp, hold phones between 5...

The Classic mini ashtray replacement digital clock has been designed to seamlessly replace the ashtray insert to ensure the integrity of your classic mini dashboard is maintained whilst introducing the modern technology of our digital clock and optio...

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

Alloy dash for cars with 3 clock pod in front of driver and L/H/D--these dashes have a knob on the glovebox.

Printed circuit board for pre 1989 cars with Smith's type 3 clock gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.

Wooden 3 clock dashboard + 3 extra gauge holes cut out, with carbon fibre finish for LHD cars.