DASH LOWER FACIA BOARDS
DT3076

£23.10 exc vat

£27.72 inc vat

In stockIn stock
The boards that sit on the facia tray of cars built after 1970 as a base for the vinyl cover VGA1995

Earlier cars had a full panel metal tray and do not require these support boards.

£23.10 exc vat

£27.72 inc vat

In stockIn stock

Recommended usage 1 x DT3076 to fit one mini.
Headlinings and Trim popular range - Qty 1
Seats and Trim-Mini Saloon MK4-1976-1985 - Mini Cl - Qty 1
Seats and Trim - Mini Clubman Estate 1970-1982 - Qty 1
Seats and Trim - Mini 1275GT - 1969-1980 - Qty 1
Seats and Trim - Mini Non Cooper 1993-96 - Qty 1
Seats and trim - Mini MK3 - MK4 1969-1980 - Qty 1
Seats and Trim - Mini Cooper 1990-1996 - Pre MPI - Qty 1

Recommended products

The black vinyl covering that lays on your lower dash shelf. For cars after 1970 where the facia panel is not a full metal panel you must fit (link)DT3076(/link)

People also bought products

This is the important steering column/pedal box bracket clamp (usually yellow).

Retainer for lower dash to hold parcel shelf liner.

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

check strap arm in mild steel for the rear doors of countryman,estate and van.

Non Genuine only and only sold as a pair. Genuine were made obsolete early 90's

Stainless steel stud for original production factory fitted sports pack arches.

These use FN105047 nuts.

New genuine arches now have an upgraded threaded brass insert and now use a stud ZUA000250.

Fluted type equivalent of GZF105A. This is equivalent

design of CZH4316 which was fitted between mini special black arches. Sold per side.

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

Large blanking grommet for the Clubman inner wings, 1.5".

This is small plate that welds into the later lower dash rails to convert them to mk1 size for people who want early switches in a late car.

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

Metal floor plug as per original with rubber seal.



For use in 1" hole.