£72.00 exc vat
£86.40 inc vat
In stock
£72.00 exc vat
£86.40 inc vat
In stockRecommended usage 1 x BAU1930 to fit one mini.
Printed circuit board for pre 1989 cars with Smith's 2 clock gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.
Printed Circuit Board for the Nippon Seiki 1997 onwards MPI Mini application, this is the complete circuit board for the Speedo, Temperature, Fuel and Tachometer.
Fresh air vent for the dash, these bolt to the bulkhead and the eyeball socket vents fit into them. These used to be handed but this vent has both hole patterns so will fit both sides. This replaces 37H7035, 37H7036, JJB101000 and JJB101010. Sold ind...
Small battery cable retaining bracket bolted at the front of the engine for pre engaged manual cars approx 1985 onwards.
Single bullet connector used to join the front loom to the rear loom near the wiper motor.
Double bullet connector used to join the front loom to the rear loom enar the wiper motor.
Repair loom and plug for all post 1976 headlamp switches.See PM08 for headlamp switch with plug and correct wires colours for loom repair
Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Left hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut.
Alloy dash for cars with 3 clock pod in front of driver + 3 auxilary gauges and L/H/D--these dashes have a knob on the glovebox.
Printed circuit board for 1989 to 1996 3 clock Nippon Seiko type Mini gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.
door cappings in carbon fibre to compliment carbon fibre finished dash
Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Right Hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut
Switch panel bracket 1987 onwards to suit later style choke cables.
Wooden 3 clock dashboard + 3 extra gauge holes cut out, with carbon fibre finish for LHD cars.
Wooden 3 clock dashboard, with carbon fibre finish for LHD cars.
Printed circuit board for pre 1989 cars with Smith's 2 clock gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.
universal battery clamp replacement with securing bolts and marked N
Chromed version of the standard demist vent on early cars where the ashtray is
mounted in the top and middle of the metal facia. Not for later cars with large
padded windscreen rails and ashtray in the front such as Mini Clubman and...
Cable for solenoid to inertia starter on Pre-1985 minis or can be used as a long earth cable.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.