FLYWHEEL STEEL MPI ONLY
C-AEG424

£182.58 exc vat

£219.10 inc vat

In stockIn stock
MPI flywheel, must use VALEO pressure plate/or C-AEG485 Minispares uprated pressure plate OR THE ENGINES WILL NOT START BECAUSE THE TIMING SLOT WILL BE OUT.

Twin point injection cars had 190mm clutch plates. C-AHT594(190mm wide or C-AHT596 (180mm wide) race rally clutch plates are recommended.

For real competition work see C-AHT600 sintered plate. This flywheel is machined to increase clamping pressure for better performance and help prevent potential clutch slip.

Standard Clutch and flywheel kits are available as follows;

GCU90115AF uses C-AEG422 flywheel/GCK151MS 180mm plate kit - 998/Some Metro 1275

GCU90116AF uses C-AEG422 flywheel/GCK371AF 180mm plate kit - Turbo

GCU90121AF uses C-AEG425 flywheel/GCK152MS 190mm plate kit - Singlepoint Inj GCU90122AF uses C-AEG422 flywheel/GCK152MS 190mm plate kit - Carb type 1275 90-94

GCU90123AF uses C-AEG424 flywheel/GCK152MS 190mm plate kit - Multipoint Injection

£182.58 exc vat

£219.10 inc vat

In stockIn stock

Recommended usage 1 x C-AEG424 to fit one mini.
Flywheel and Clutch - Qty 1

Kit products
VERTO CLUTCH & FLYWHEEL TWIN POINT MPI
GCU90123AF

This MPI unit includes a steel flywheel and pressure cover with clutch plate and release bearing. All parts supplied separately.

This kit does not include the centre boss to keep costs down but is available as DAM5921.

£230.00 exc vat

£276.00 inc vat
Kit contained products
STARTER MOTOR RING GEAR 129T VERTO PRE-ENG
PSF10003

Ring gear for all cars fitted with the pre-engaged starter on Verto flywheels from about 1984 on.

£23.83 exc vat

£28.60 inc vat
People also bought products
MINI VERTO CLUTCH KIT FOR INJECTION MODELS
CK9378

Non Genuine 3 piece Injection Clutch with the larger 190mm wide for 1990 on and all injection cars, but it can be used on earlier non injection Verto type engines only if the flywheel is 100% PERFECT WITHOUT WEAR. Check nothing fouls when bolting up ...

£85.50 exc vat

£102.60 inc vat
VERTO PERFORMANCE CLUTCH COVER
C-AEG485

Verto 20% upgraded performance pressure plate which should be used with 190mm organic clutch plate C-AHT594 or the paddle type drive plate as used in racing C-AHT600. This pressure plate has a blue paint identifying mark and...

£75.00 exc vat

£90.00 inc vat
CLUTCH LEVER ARM AND PLUNGER RACE KIT PRE VERTO
C-22A2204

Pre verto race quality tuftrided clutch arm kit made in EN24T for any heavy duty diaphragm- special design plunger with arm to suit, hardened clevis pin and R-clip included.

£81.50 exc vat

£97.80 inc vat
FLYWHEEL BOSS VERTO ONLY
DAM5921

Upgraded Centre boss for all verto clutch/flywheel.

Fixing bolts are DAM5920 which are supplied in many clutch kits.

£52.65 exc vat

£63.18 inc vat
CLUTCH KIT TURBO WITH 180mm PLATE
GCK371AF

3 piece Verto Clutch kit for Turbo with 180mm plate which can be used on any Verto flywheel including injected cars. Approximately 20% upgrade over standard this is ideal for any tuning mods to any Verto flywheel but cars from 1990 were fitted with a...

£118.43 exc vat

£142.12 inc vat
CLUTCH PLATE 4 FINGER RACE PADDLE 190mm FOR 1990 O...
C-AHT600

Performance type Verto 190mm wide paddle type drive plate as used for racing.

This will not fit pre Verto backplate/flywheel as it is to wide.

£236.47 exc vat

£283.76 inc vat
CLUTCH PLATE VERTO PERFORMANCE PLATE 190mm WIDE
C-AHT594

Performance clutch plate for road and rally Verto type - see also 20% upgraded pressure plate

£169.02 exc vat

£202.82 inc vat
VERTO SHORT CLUTCH ARM NON GENUINE
DAM5355MS

This Verto type clutch arm is 2.75" long from the clevis pin hole.The earlier type pre verto is over 6"(165mm)long. the ball wears on both types and if the clutch is wrongly adjusted the arm (mainly the long type) can bend by way of hydraulic pressur...

£15.23 exc vat

£18.28 inc vat
CLUTCH HOSE BRAIDED ONE PIECE. CLUTCH MASTER TO SL...
C-AJJ4025COMP

Delete the metal pipe and existing hose by fitting this longer one piece steel braided pipe which can be used for either early or verto clutches. A sensible modification for all mini owners.

£23.19 exc vat

£27.83 inc vat
CLUTCH PLATE ALL 1300 VERTO 1990on 190mm WIDE
GCP90832AF

FOR ALL 1300cc verto clutches which are 190mm wide

£38.43 exc vat

£46.12 inc vat
CLUTCH SEAL PROTECTOR SHIELD-FITTED TO VERTO CLUTC...
DAM2821

When the verto clutch was introduced the factory started fitting this plastic protector over the clutch oil seal on Metro's. It then apeared on injection minis with LUF10005 clutch seal to the end of production. Should be replaced when s...

£3.00 exc vat

£3.60 inc vat
CLUTCH KIT 190MM PLATE 1990 onwards
GCK152MS

3 piece Borg and Beck Injection Clutch with the larger 190mm wide for 1990 on and all injection cars, but it can be used on earlier non injection Verto type engines only if the flywheel is 100% PERFECT WITHOUT WEAR. Check nothing fouls when bolting u...

£88.50 exc vat

£106.20 inc vat
CLUTCH HOSE BANJO TYPE BRAIDED A PLUS
C-AJJ4025B

Steel braided clutch hose for verto type clutches with short lever arm.

£16.86 exc vat

£20.23 inc vat
CLUTCH PLATE ROAD/RALLY 180mm made by AP RACING
C-AHT596

High performance plate- from the old AP Racing division.

Bonded rally/race type 180mm wide clutch plate which is ideal for fast road and track days.

This was the most commonly used performance plate from the AP Racing section and o...

£291.74 exc vat

£350.09 inc vat
VERTO RELEASE BEARING RETAINING O RING
AAU2866

"O"RING FOR A+ verto clutches only

£0.60 exc vat

£0.72 inc vat
VERTO CLUTCH RELEASE THRUST
GRB239

If your late model Mini has a short (3" or so) clutch arm, you have a "Verto" clutch. This is your release (throw-out) bearing. Retaining o ring is AAU2866.

£9.52 exc vat

£11.42 inc vat
CLUTCH SLEEVE A PLUS TOPHAT
AHU1564

Sleeve that covers the flywheel bolt on verto clutches for the release bearing

Note--early 58mm internal diameter sleeves had a plastic anti rattle sleeve which is no longer available but this later type is smaller in diameter and therefore ...

£15.00 exc vat

£18.00 inc vat
VERTO CLUTCH DIAPHRAGM
GCC679

AP Technical department recognised that GCC679 with a green paint identifying mark as their best for clamping pressure to date, apart from the 20% uprated version C-AEG485. For performance engines it works best by fitting [l...

£67.50 exc vat

£81.00 inc vat
VERTO CLUTCH SLAVE CYLINDER
GSY118MS

This is the only aftermarket copy of the GSY118 available and have been sold by us for many years without any problems. We always recommend genuine but the choice is yours. I would stick to the original from AP lockheed if keeping the ca...

£24.00 exc vat

£28.80 inc vat
GENUINE VERTO CLUTCH SLAVE CYLINDER
GSY118

Genuine AP from original tooling. The latest model Minis have a different design clutch and thus a unique slave cylinder. The cylinder mounts more vertical than horizontal and even looks a little strange. The Mini clutch slave cylinder is a vital l...

£44.55 exc vat

£53.46 inc vat