INNER WING CLUBMAN L/H INNER WING

The full inner wing with wheel arch section for the mini clubman range --if you need only the first 20" approx of the inner wing see CZH3063.

£275.00 exc vat

£330.00 inc vat

now

£233.75 exc vat

£280.50 inc vat

FRONT SUBFRAME BOLT FITTING KIT 1976 on

KGB10022FK

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

£14.46 exc vat

£17.35 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

£0.90 exc vat

£1.08 inc vat

FLOOR PAN FRONT TO REAR L/H VAN/ESTATE

FS007L

Van L/H full length half floor. You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width and length-plain pressed floor with indents but no carpet brackets or lugs underneath

£93.90 exc vat

£112.68 inc vat

BONNET HOOK CLEVIS PIN

4B8769

This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...

£0.75 exc vat

£0.90 inc vat

WINDSCREEN WASHER JET Mk1/2 original shape

GWW807

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...

£3.50 exc vat

£4.20 inc vat

INNER WING AND A PANEL R/H C/MAN

CZH410

full inner Right hand wing with wheel arch panel plus the A panel fitted for ease of fitment and alignment for the Mini Clubman with radiator air slats-see also CZH3062 and CZH414

Not usually a stock item but available to order

£250.00 exc vat

£300.00 inc vat

now

£212.50 exc vat

£255.00 inc vat

WASHER BOTTLE MK1/2 ORIGINAL TYPE

17H2536

Original MK1/2 shape with correct 1.25" small neck.

Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.

The original part number for the Winguard MK1 bottle was ADA383...

£14.75 exc vat

£17.70 inc vat

BODY HALF SIDE REAR PICKUP L/H

14A7556MS

R/H Pick Up Non Genuine body section from back of the cab to rear but less rear the rear quarter that holds the rear lamps.Genuine panels are no longer manufactured but this NON genuine part is the only repair panel available which we have also used...

£149.10 exc vat

£178.92 inc vat

BODY HALF SIDE REAR PICKUP R/H

14A7555MS

R/H Pick Up Non Genuine body section from back of the cab to rear but less rear the rear quarter that holds the rear lamps.Genuine panels are no longer manufactured but this NON genuine part is the only repair panel available which we have also used...

£149.10 exc vat

£178.92 inc vat

PARCEL SHELF LOWER RAIL FOR SWITCH PANEL DASH

BMP201

Lower parcel shelf facia panel with hole for switch panel that sits between the A posts. This is made to fit Mk3 cars from 1970 onwards with soft trim moulding.

see also 14A7175 for the retainer that welds to the top

£65.00 exc vat

£78.00 inc vat

now

£55.25 exc vat

£66.30 inc vat

WINDSCREEN LOWER SCUTTLE PANEL NON GENUINE

HMP441001MS

This Non genuine pattern panel has the holes for windscreen wipers and jets with barely an inch of pillar.

On cars from 1992/3 on check the original windscreen drain channel as the VIN numbers were stamped above the clutch master cylinder-wi...

£44.85 exc vat

£53.82 inc vat

HERITAGE CLUBMAN FRONT GRILL PANEL ASSEMBLY 76 ON

HMP441040

Really a built up half front end for the mini clubman, consists of a lower panel with headlamp panels,slam panel and stiffener between the front and slam panel. 76 ON--no inner or outer wings

£245.00 exc vat

£294.00 inc vat

now

£208.24 exc vat

£249.89 inc vat

BONNET LOCK PIN .CLUBMAN only

14G2444

Bonnet lock pin for MiniClubman ,Midget,MGB a

£4.53 exc vat

£5.44 inc vat

SCREEN SEAL KIT CZH1719MS. JRC2674 & CHROME INSERT...

GS13463

Front and rear screen with chrome plastic insert.Saving nearly 15% on cost of individual partts

£23.00 exc vat

£27.60 inc vat

FLOOR EXTENSION PANEL FOR MINI VAN/ESTATES ETC

14A9023

Commercial Mini floor extension

It is an essential part for the correct restoration of all the longer wheelbase mini derivatives. From the original tooling.

£95.00 exc vat

£114.00 inc vat

now

£80.75 exc vat

£96.90 inc vat

RADIATOR COWLING CLUBMAN BODY SHAPE

CZH570

The left side inner fender of the Mini Clubman should have a metal cowling to focus the air from the radiator to the wheel well. The almost sqaure cowling is spot welded to the inner fender. If you are resoting your car properly you will need to ha...

£45.00 exc vat

£54.00 inc vat

now

£40.50 exc vat

£48.60 inc vat

INNER WING R/H CLUBMAN ONLY

CZH414

Full length inner wing for the R/H on mini clubman.

£215.00 exc vat

£258.00 inc vat

now

£182.75 exc vat

£219.30 inc vat

DOOR HINGE KIT SALOON MK3 SET NON GENUINE

MSSK017B

4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.

Sold seperately as

top right CZH202MS 1 r...

£54.00 exc vat

£64.80 inc vat

CLUBMAN SHAPE BONNET

CZH2609

Available again from genuine tooling

Fits all mini clubmans only. There is no aftermarket version available of this bonnet anymore.

this bonnet MUST use the later 1981 onwards BMP348 / BMP349 hinges

£199.00 exc vat

£238.80 inc vat

now

£179.10 exc vat

£214.92 inc vat

PLASTIC NUT ON DOOR FIXINGS

GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.

Also suitable for Twin Point indicator fixings.

£0.24 exc vat

£0.29 inc vat