£114.81 exc vat
£137.77 inc vat
In stock
£114.81 exc vat
£137.77 inc vat
In stockRecommended usage 1 x PCF101240ALLOY to fit one mini.
Expansion tank in plastic for Twin point injection cars with front fitting radiator only. Now Back in stock. Don't forget to check the special plastic cap GRC1184 is functioning correctly, it should allow water/pressure to escape from it...
Fitted from A plus on to increase engine running temperature. If your radiator has a sender unit in the bottom you may have an expansion tank and therefore the radiator will need a better sealing pressure cap which allows a small vacuumGRC20...
Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.
MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...
3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller...
Spring clip for securing the top hose on MPI front mounted radiator models, now in stainless steel.
Replacement electric fan assembly complete with laser cut metal brackets so that it can be mounted to the original mounting points of the standard fan
uses 9" blowing air fan.
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or the...
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or t...
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or th...
Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney blue Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer w...
Silicone heater hose, 42" for cars with the original heater valve bolted on the cylinder head.
Cars after 1976 require one of this 42" length and one C-GRH1006 39" length.
Cars from late 1984 to 1988 had 5/8" outlets on...
Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head.
Pre 1976 cars can use 2 0f these lengths, commonly known as 1/2" bore heater hose. also see C-GRH1007 for the longer 42" hose on 1976...
Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.
5/8" straight connector piece for heater hose modifications on late minis.
Useful when re-routing hoses or joing hoses.
Long lasting silicon by pass hose between cylinder head and water pump.
These are easy to cut and slide on easier than the old conventional rubber type.
It has been made this length to fit 1275cc engine,which used the longest hose.<...
This electic radiator fan was fitted as standard on minis with the large round hole cut out in the inner wing fron 1991. On the 1275 Cooper last carb models there was an earler type fan which is also no longer available. As the original Cooper carb f...
This wiring harness was introduced by Rover in Tech buletin 0043 for twin point cars where the fan did not work correctly to the sensor GTR206--has a modified brown plastic terminal.
A much better looking under bonnet item this bright blue hose will last much longer than rubber -made in silicon-will fit original plastic type radiator outlets or latest metal type outlets.
Water hose pipe clip for the GRH1140 top hose and twin point injection cars which had larger hoses fitted .This clip will wind down to fit most radiator hoses if required.
This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.