EXHAUST RC40 WITH LARGE BORE OUTLET PLUS LCB AND F...
RC40PACKAGE008

£245.43 exc vat

£294.52 inc vat

In stockIn stock
The famous RC40 mild steel side exit large outlet exhaust with a new state of the arts exhaust manifold C-AEG364 plus the fitting kit for the exhaust system.

There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using QL5000 type couplings will help but re-shaping of manifold is still required in most cases.

£245.43 exc vat

£294.52 inc vat

In stockIn stock

Recommended usage 1 x RC40PACKAGE008 to fit one mini.

Kit contained products
RC40 REAR BOX MILD STEEL SIDE EXIT LARGE BORE
RC40-010

The popular RC-40 exhaust system has been updated and called the millennium range from the year 2000. All retain the optimum size and configuration. In addition, they now have stainless steel pipes for better appearance and rust resistance. And for t...

£99.02 exc vat

£118.82 inc vat
RC40 MIDDLE BOX & DOWNPIPE MILD STEEL
RC40-013

When fitting to an LCB cut 5-8" off.



This downpipe and centre box are made the correct length for the freeflow manifold but when fitting to a LCB the flanged end should be cut off 5"-8" from the end. The downpipe and exhaust shoul...

£63.69 exc vat

£76.43 inc vat
EXHAUST U BOLT CLAMP 2 1/8" 54mm
GEX9010

£0.88 exc vat

£1.06 inc vat
RC40 EXHAUST FITTING KIT
RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

£6.85 exc vat

£8.22 inc vat
MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES
C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat
People also bought products
MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...
C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat
EXHAUST RC40 CLASSIC EXHAUST MILD STEEL AND FITTIN...
RC40PACKAGE001

Original side exit RC40 Std bore exhaust, LCB short downpipe and fitting kit.

This includes the short downpipe for use with the Long Centre Branch type manifold. Use manifold C-AEG365.

£73.31 exc vat

£87.97 inc vat
MANIFOLD GASKET FOR FUEL INJECTED CARS
GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.


...

£5.10 exc vat

£6.12 inc vat
WASHER FOR MANIFOLD THICK TYPE
12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

£0.34 exc vat

£0.41 inc vat
MANIFOLD GASKET INLET / EXHAUST
AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

£0.96 exc vat

£1.15 inc vat
ALLOY WATER HEATED TORQUEMASTER INLET MANIFOLD HS4...
C-AHT770

Genuine mini Spares inlet manifold dyno tested and designed for our Stage one kit C-STN17. The single SU manifolds is developed to give maximum airflow and gas speed, yet fit all engines even if the standard air cleaner set-up is used. I...

£32.00 exc vat

£38.40 inc vat
MANIFOLD NUT SHORT BRASS 5/16" UNF
GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat