Showing 1 to 11 of 11

Genuine AP adjuster screw and wedges kit (not the cheap import, available}.

Beware,This is a safety critical part and the cheap adjuster pins have a wrong angle and shape against the wedges making brakes inefficient after adjustment.

The four tension springs as a car set for the rear drum brake shoes which should be replaced at least every other shoe change under normal circumstances.



This kit also fits front brakes with 1 cylinders per drum from 1959-64

Genuine AP wedges (see kit 17H7620 which has 2 wedges plus adjuster screw).

These are the little wedges that fit in the brake adjuster screw bracket on the rear brake drum to adjust the brake shoes. The adjuster is [link]17H7619...

Genuine AP as supplird by Rover.Right Hand rear backplates are the only type available now for the Mini and have an extra hole in as per the Mini Metros and take the same plug AEU1541A which is not supplied. If you have GWC1101<...

Brake adjuster pin for all mini rear drum brakes plus single wheel cylinder front drum brakes. It is more economical to purchase 17H7620 kit which includes one adjuster pin and two tappets.

Genuine AP,One of the two return springs, per wheel, for Mini single-leading front drum brakes 1959-64 and all lower Mini rears. This is the spring with the coils near each end.

A good mechanic will replace the pull-off springs ([link]17H762...

Genuine AP as supplied by Rover. Left Hand rear backplates are the only type available now for the Mini and have an extra hole, as per the Mini Metros, and take the same plug AEU1541A which is not supplied. If you have GWC1101

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Mintex brake shoes for the rear of all minis which are 1.25" wide. Also fitted to front on early single leading shoe cars (dry suspension pre 1964) with a single wheel cylinder. Manufactured by Mintex and sold as a box set of 4 brake shoes for one re...

Genuine AP brand new rear right hand back plate kit (beware of copies).

These are ready to bolt on brand new stock from AP Automotive and have the .75" bore genuine wheel cylinders GWC1102. Remember that all wheel cylinder rubb...

Genuine AP brand new rear Left Hand back plate assembly (beware of copies).

These are ready to bolt on, brand new stock from AP Automotive and have the .75" bore genuine wheel cylinders GWC1102. Remember that all wheel cylinder ...

1