If your washer botle is in the boot this is the pump fitted originally to twin points 1996 on. Now only available without all the wiring and you just plug your socket on your loom direct to the pump
This is the metal bracket that holds most round shaped windscreen washer bottles from the 1960s which was fitted to MGB, Sprite and Mini but was in a black painted finish which got tatty when rusting so we made them in stainless steel for long life. ...
This pump was fitted to the strange shaped, tall looking washer bottle GWW935 fitted under the bonnet with an integral fitted electric washer pump, fitted from 1990 until the location was changed to the boot area on single point injectio...
Has your windscreen washer bottle disappeared, or just disintegrated with age? This plastic washer bottle for early Minis with the Tudor logo has a 2" neck size, with internal tube and non return valve.
For originality see 17H253...
Fitted in the engine compartment pre October 1988 until the introduction of GWW940 and in the boot from 1991 on. This large windshield washer plastic bottle was then moved to the boot area and mounts on the R/H rear wheel arch. Rectangu...
Non return valve fitted from 1992 when the washer bottle is fitted in the boot.
Original MK1 shape windscreen washer bottle WIRE CLIPS 1959-63.
Have yours disappeared, or just disintegrated with age?
The original Winguard MK1 bottle part number was ADA3833 but kept as 17H2536.
Original ty...
Rubber grommet/seal as supplied in GWW935 washer bottle, to seal to the pump.
Windscreen washer pump bracket for MK2 onwards cars with padded dash rail.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.