Fits 1985 to 1997 cars but can be used for earlier steering lock type cars by
using later bush and cutting the outer column down to size at the bottom.
If you had an indicator pin on your original you will need to drill and tap to ...
these are our last few genuine new steering racks for the old A series engine Metro, less track rod ends at the same price as a decent recon rack might cost.
Brand new rack for Mk2 on Left Hand drive cars less track rod end joints,with no neccessity for old rack in exchange.On most of these racks one of the small bolts that holds the pinion cover on sticks out. do not be tempted to tighten it up as it wil...
Left hand drive steering rack for all sportspack models, 1997 onwards. The rack has reduced lock in order to help with clearance of the larger 6x13 sportspack wheels.
Right hand drive steering rack for all sportspack models, 1997 onwards. The rack has reduced lock in order to help with clearance of the larger 6x13 sportspack wheels. Very useful when fitting aftermarket 13" wheels that foul bodywork.
Mini Spares genuine product-plastic 2 piece casing for the steering wheel cowl was introduced in 1976 which was for the introduction of twin indicator stalks and a different steering lock. Twin point injection cars have different cowling and switches...
Special 25.4mm size nut to hold the steering wheel .
Earlier cars had a 33.3mm wide nut ACH6001. Same internal thread as earlier type with locking agent on thread for safety. Fitted from about 1990 on except MPI which has spcial...
An easy way to dress up any car is with a better looking steering wheel, and a smaller diameter wheel should be considered mandatory for driving enjoyment. Most of our cars are such that the steering wheel is ofen exposed to the destruction caused by...
Brand new steering rack less track rod joint ends for Mk2 models 1967 on, with right hand drive steering.
Always replace the dust shield sponge 21A30 between the body and rack where the spindle that locates the inner ...
Plastic upper bush that should be replaced when you have play between the inner and outer steering column. Remember to change the bottom as well whether it be felt or plastic type.
Quickracks-If you are interested in performance driving then you know reaction time from the driver to the car is critical; the time it takes to turn the steering wheel to the desired angle is important! The stock/standard l/h/d steering rack is 2.7 ...
Steering wheel boss to fit pre twin point injection cars for Mountney M range wheels,Jamex,Momo,BBs,sparco plus others 6 X 70mm pcd. --A snap on adaptor for a quick release
steering wheel to fit this adaptor is available as SWABS
Locktabs for under the steering arm bolts on all minis. Fits either side.
Sold individually
Genuine Minispares approved joints that we have supplied since 2004-
Beware of spurious products on the market as these are a safety critical part.
BEWARE OF CURRENT SO CALLED GENUINE ITEMS AS THEY ARE NOT FIT FOR PURPOSE.
...
This gaiter kit with plastic clips fits many Genuine Rover Racks plus many Quinton Hazel. Also fitted the first generation of Quick Racks where the gaiters are different diameter bore sizes- approx 42.4mm and 26.7mm -
6.5"-6.75" Long
This Retro Classic Cooper look a like- or even the Mota-lita look, has a Billet centre boss and vinyl covering giving a great look and feel. Will not fit air bag twin point injection models (mpi). This is a 13" diameter wheel.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.