HANDBRAKE ADJUSTING NUT TWIN HANDBRAKE CABLES
2A5858

($2.85) £2.85 exc vat

($3.42) £3.42 inc vat

In stockIn stock
This is the unique adjusting nut for the handbrake cable.

($2.85) £2.85 exc vat

($3.42) £3.42 inc vat

In stockIn stock

Recommended usage 2 x 2A5858 to fit one mini.
Handbrake Lever & Cables - Qty 2

People also bought products
WASHER FOR BRAKE SERVO NON RETURN VALVE
11D5070

Washer for 17H2646ORIGINAL brake servo non return valve

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat
GENUINE AP LOCKHEED HANDBRAKE LEVER GAITOR
17H7612GENUINE

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP Lockheed rubber boot

($5.03) £5.03 exc vat

($6.04) £6.04 inc vat
BRAIDED 4 LINE BRAKE HOSE KIT VINTAGE BLACK
C-AJJ4026BLACK

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

($55.32) £55.32 exc vat

($66.38) £66.38 inc vat
MILLERS RACING BRAKE FLUID 300 PLUS 500ml
MILLERS008

Extra high boiling point (above 310°C) brake fluid exceeding the requirements of SAE J1703, SAE J1704 and FMVSS 116 DOT 4 for use in competition braking systems.



Application



Use for racing and high performance br...

($15.26) £15.26 exc vat

($18.31) £18.31 inc vat
BLEED SCREW 7mm for rear wheel cylinders
513118MS

Bleed nipple for all rear wheel cylinders and is 7mm spanner size. Nearly all

current wheel cylinders are using 7.8mm rather than 6.2mm(1/4")spanner size but same 1/4"unf thread. See 660510 spanner for this size bleed nipple.

($2.03) £2.03 exc vat

($2.44) £2.44 inc vat
BRAKE MASTER CYLINDER TO SERVO BODY SEAL 89 ON
NAM8570

Seal for between the brake servo and master cylinder, fits all late 1988 onwards vehicles where the master cylinder was mounted directly to the servo unit.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat
SERVO GROMMET / SEAL FOR VAC PIPE TO BODY CASING
NAM8569

Replacement rubber grommet for the servo vacuum hose for the 1992 onwards brake servo (GSM119)

($2.48) £2.48 exc vat

($2.98) £2.98 inc vat
SERVO NON RETURN VALVE MK1/2
17H2646ORIGINAL

Mk1/2 in-line brake servo valve for 21A1293 servo. It is essential if you do not have the correct U shape section formed in the servo hose to stop petrol contaminating your servo. Not supplied in any kit it is an important part. If you ...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
BRAKE PAD SPLIT PINS ONLY FOR VENTED CALIPERS (KIT...
GBK1011

4 pins supplied (clips are no longer available)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
BRAKE PAD SPLIT PIN ONLY FOR VENTED CALIPERS
PS610242

Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.

($0.21) £0.21 exc vat

($0.25) £0.25 inc vat
MASTER CYLINDER METAL CAP ORIGINAL TYPE
17H3723

Replacement metal master cylinder cap as originally fitted to 1959-1963 Minis on single line brake systems is a great historic feature.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
BRAKE PAD SET 998 COOPER ULTIMAX
GBP102ULTIMAX

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

($13.13) £13.13 exc vat

($15.76) £15.76 inc vat
BRAKE PIPE KIT LEFT HAND DRIVE CONVERSION FOR GMC2...
BAU5655MS

As the original brake pipe kit is now obsolete, we now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

($21.52) £21.52 exc vat

($25.82) £25.82 inc vat
BRAKE PADS 8.4 DISC ULTIMAX ROAD USE
GBP281ULTIMAX

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

($28.05) £28.05 exc vat

($33.66) £33.66 inc vat
BRAKE PAD SET ULTIMAX STREET METRO 4 POT
GBP258ULTIMAX

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

($32.67) £32.67 exc vat

($39.20) £39.20 inc vat
BRAKE PAD SET ULTIMAX STREET 7.5 DISC
GBP103ULTIMAX

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

($28.16) £28.16 exc vat

($33.79) £33.79 inc vat
BRAKE PADS 8.4 DISC + SPRITE/MIDGET EBC GREEN SUFF
C-AHT16GREEN

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

($30.75) £30.75 exc vat

($36.90) £36.90 inc vat
BRAKE PADS GREEN STUFF "S" PADS
C-8G8995GREEN

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

($30.75) £30.75 exc vat

($36.90) £36.90 inc vat
BRAKE PADS GREEN STUFF FOR 4 POT CALIPERS
C-8G8994GREEN

For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat
BRAKEPIPE KIT SINGLE LINE DRY SUSPENSION LESS SERV...
GL4991

Single line L/H/D - dry suspension - no servo fitted. If you have drum brakes and a servo you should use GL4992 plus 2 of HF10.

These kits or pipes are approx 35% off retail.

($100.28) £100.28 exc vat

($120.34) £120.34 inc vat